wrong section but all other sections suck.
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
wrong section but all other sections suck. im having a small problem as detailed here.
https://ls1tech.com/forums/pcm-diagn...g-burnout.html
thank you for any valid ideas.
https://ls1tech.com/forums/pcm-diagn...g-burnout.html
thank you for any valid ideas.
Launching!
Joined: Feb 2011
Posts: 234
Likes: 1
"Are you sure it's not just dragging the motor down because it's starting to hook in 3rd gear? As you burn the water off you're probably also shifting into 3rd gear, The tires will start to stick and put a load on the engine and cause it to bog. It doesn't take much power to spin wet tires in 2nd gear but when in 3rd with sticky tires... Your probably just running out of power to keep them turning = Bog"
I think he pretty much has hit it on the head...
You are going from a 1.48 torque multiplication to a 1:1 just about the same time the tires are getting hot and sticky...
Not to mention you are dropping your rpm's around 30% or so at that same critical time...
I wouldn't worry about it, unless it is some how effecting your ability to hook up.
I think he pretty much has hit it on the head...
You are going from a 1.48 torque multiplication to a 1:1 just about the same time the tires are getting hot and sticky...
Not to mention you are dropping your rpm's around 30% or so at that same critical time...
I wouldn't worry about it, unless it is some how effecting your ability to hook up.
Yes, post a log. Perhaps it's hitting an area of the VE or timing table that it normally doesn't see.
Also, 3rd gear burnout is exactly correct. Guys who use second aware simply lucky not to break the sprag coming out of the water.
Jake is the man on TH400's. He has helped me a lot,
I actually just do mine in drive as it's not a manual VB.
Finally, is the 2-3 shift ok on the track? What gears/tires?
Ron
Also, 3rd gear burnout is exactly correct. Guys who use second aware simply lucky not to break the sprag coming out of the water.
Jake is the man on TH400's. He has helped me a lot,
I actually just do mine in drive as it's not a manual VB.
Finally, is the 2-3 shift ok on the track? What gears/tires?
Ron
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
Yes, post a log. Perhaps it's hitting an area of the VE or timing table that it normally doesn't see.
Also, 3rd gear burnout is exactly correct. Guys who use second aware simply lucky not to break the sprag coming out of the water.
Jake is the man on TH400's. He has helped me a lot,
I actually just do mine in drive as it's not a manual VB.
Finally, is the 2-3 shift ok on the track? What gears/tires?
Ron
Also, 3rd gear burnout is exactly correct. Guys who use second aware simply lucky not to break the sprag coming out of the water.
Jake is the man on TH400's. He has helped me a lot,
I actually just do mine in drive as it's not a manual VB.
Finally, is the 2-3 shift ok on the track? What gears/tires?
Ron
shifts great at the track.
Trending Topics
Thread Starter
8 Second Club
Joined: Apr 2006
Posts: 1,011
Likes: 31
From: in my neighborhood
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
