Manual boost controller 20psi Max?
So I offered to do some updates to this car. It's in my garage now.
I'll be wiring in the boost controller as well as adding a new electric fan.
To do that I neede to rebuild the hot side.
Someone mentioned boost leaks?
I found no less than 30 leaks in the welding job. Along with one large crack.....
The cold side not too much better.
Amazing it makes the power it does. Should be better when I'm done!
I'll be wiring in the boost controller as well as adding a new electric fan.
To do that I neede to rebuild the hot side.
Someone mentioned boost leaks?
I found no less than 30 leaks in the welding job. Along with one large crack.....
The cold side not too much better.
Amazing it makes the power it does. Should be better when I'm done!
Thread Starter
Joined: Aug 2011
Posts: 4,729
Likes: 814
From: Portland, OR
We shall see.
I'm just fixing the manifold welds. They look like hell, but won't leak.
The crossover will be new.
Although the sloppy style isn't my first choice, it works fine. But needs to be at least done correctly.
The down pipe was worse. I wonder if we ever got any accurate AFR readings.
I'm just fixing the manifold welds. They look like hell, but won't leak.
The crossover will be new.
Although the sloppy style isn't my first choice, it works fine. But needs to be at least done correctly.
The down pipe was worse. I wonder if we ever got any accurate AFR readings.
