S475 346ci Turbo Bird
#34
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
So a couple things have changed that I didn't explain in the previous post. I changed the location of the bov. I wanted it moved farther away from the throttle body so there would be more room to space out the maf, meth nozzle and IAT.
My replacement cylinder finally showed up so that I could bend tubing again!
With that said I finished up the upper core support bar.
Still haven't driven it yet. Its weird for me that I litterally have no drive to finish it considering how little time is left in it. IDk. Ive only put a mile on the car in the past 5 years or so. I only have 62,xxx miles on the car.
My replacement cylinder finally showed up so that I could bend tubing again!
With that said I finished up the upper core support bar.
Still haven't driven it yet. Its weird for me that I litterally have no drive to finish it considering how little time is left in it. IDk. Ive only put a mile on the car in the past 5 years or so. I only have 62,xxx miles on the car.
#40
TECH Resident
Thread Starter
iTrader: (7)
Join Date: Apr 2007
Location: STL, Mo
Posts: 954
Likes: 0
Received 0 Likes
on
0 Posts
Yes. Most likely just do one of those boost screens.
I was kicking the idea of making an inlet that would form to one of the nostrils on the ram air but I dont know how Im going to do that with the core support bar that I put in.
I was kicking the idea of making an inlet that would form to one of the nostrils on the ram air but I dont know how Im going to do that with the core support bar that I put in.