Flex fuel for PD blower
TECH Fanatic
Joined: Oct 2015
Posts: 1,280
Likes: 28
From: Pittsboro, IN
You would pick up a little power from the fuel change alone, and give you some added safety. What kind of pressure does a typical Maggie set up make? 10-12psi? Going E85 certainly wouldn't be a bad idea if you have the fuel system to support it.
Thread Starter
10 Second Club
Joined: Nov 2005
Posts: 933
Likes: 75
Mine is at 12# and I already have fuel pumps and injectors that are sized for e85. It's only like 180 bucks for the sensor and other parts. I can tune it. I just didn't want to go thru the exercise and not gain anything.
Thread Starter
10 Second Club
Joined: Nov 2005
Posts: 933
Likes: 75
You are probably a better tuner than I am. Mine is a little over 600 but has been thru several changes since it was on a dyno. Could be less now 
. It's street and track tuned. I plan on staying conservative. Now I am going to get the parts on the way.
Thanks
. It's street and track tuned. I plan on staying conservative. Now I am going to get the parts on the way.Thanks
