yenkomike

iTrader: (2)

here are a few pics of my latest hot side pipes I have been making this is the latest and greatest. 2 1/4 pipe with power steering for my brothers truck to replace the cracked up on3 kit we have been welding up all year. the last couple I have been adding the third vband to make the flange adjustable for height and if I want to go t6 it is a half hour job to make one. the last one was almost exactly the same but no p.s. and has ran 9.40s at 3600 lbs on a 5.3 but it was 2 1/2 pipe so well see if the smaller pipe helps spoolup.thanks.

3 window

iTrader: (1)

Nice job. I like the ability to change to a t6 easily. Great idea.

yenkomike

iTrader: (2)

yeah id added the extra vband on the last one for perfectly adjusting the height but swapping to t6 will also be a snap.its hard to see but there is a brace on the front of the head and it rides against the pipe and gets a clamp to help support the turbo.

Forcefed86

iTrader: (4)

Can also grab the T4/T6 flanges and not have to swap anything... Looks good!