Microsquirt people needs some help
#1
TECH Fanatic
Thread Starter
iTrader: (12)
Join Date: Feb 2004
Location: Mass
Posts: 1,600
Likes: 0
Received 0 Likes
on
0 Posts
Microsquirt people needs some help
Need to start fresh looking for base tune to start over
Truck intake/ regulator
60lb deja
Truck intake/ regulator
60lb deja
4.8
216/220 cam
Gt45
Walbro 400
Any help would be appreciated
216/220 cam
Gt45
Walbro 400
Any help would be appreciated
#2
TECH Fanatic
#3
I have a similar setup
60lb injectors 5.3 gt45 run it on 11psi 11.0 afr
But I am a hot air setup so timing is stupid low compared to what u would end up using but any tune in the sloppy page will get you as close as anyone's will without you tuning to your particular setup on your car.
60lb injectors 5.3 gt45 run it on 11psi 11.0 afr
But I am a hot air setup so timing is stupid low compared to what u would end up using but any tune in the sloppy page will get you as close as anyone's will without you tuning to your particular setup on your car.
#4
Registered User
Join Date: Aug 2018
Location: Michigan
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Stock 5.3 microsquirt
So i have
-5.3 stock
-Aem wideband
-Microsquirt v3
-Iac stepper from efi source
-wal 255
I am running into a problem with high idle and rpm surge any suggestions thanks
-5.3 stock
-Aem wideband
-Microsquirt v3
-Iac stepper from efi source
-wal 255
I am running into a problem with high idle and rpm surge any suggestions thanks