Lsa Supercharger on 6.0
Thread Starter
Staging Lane
Joined: May 2009
Posts: 65
Likes: 0
Lsa Supercharger on 6.0 Im really interested in this setup, and was wondering how must power can a 6.0 put down with ported heads, cam and a lsa supercharger? i've been searching around and the supercharger is inexpensive
Thread Starter
Staging Lane
Joined: May 2009
Posts: 65
Likes: 0
After talking to some people that did the swap and talking to some vendors that sell prochargers and other supercharger kits, it's not cheaper. It cost about the same. A complete lsa swap kit cost $5300 and a intercooled procharger kit cost $5400. So the only real benefit is the different factor
Staging Lane
Joined: Dec 2012
Posts: 91
Likes: 0
You can find used LSA superchargers pretty cheap sometimes, but they don't have really high power potentially. I considered going with one, but after doing some research found I'd be producing a ton of heat trying to make the power I wanted. I ended up with an F1R procharger and couldn't be happier.
I am thinking im in the $2500-3000 range for the blower stuff on my C10. Its a iron 6.0 with adapter plates and a LS Concepts drive setup (Dunno how well it works yet as its still on the stand) I figure these things max out at around 700hp.... its still not too bad of a deal VS a complete kit for a mild build.
I am thinking im in the $2500-3000 range for the blower stuff on my C10. Its a iron 6.0 with adapter plates and a LS Concepts drive setup (Dunno how well it works yet as its still on the stand) I figure these things max out at around 700hp.... its still not too bad of a deal VS a complete kit for a mild build.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo The 317's that came on it, just changed the springs and cleaned em up
http://www.ctsvowners.com/forum/4-en...s-updated.html
Registered User
Joined: Jan 2018
Posts: 1
Likes: 0
harness mods?? thinking of installing a Lsa charger on my 2007suburban 3/4 ton with a ly6. I wasent sure what I needed for engine harness or harness mods. I work in a gm parts dept. so parts are pretty easy to get a hold of. just wondering if anyone has done it, if the would share a parts list. and would love some advice on cam valve springs etc going to be a daily driver so can't be too radical.
thinking of installing a Lsa charger on my 2007suburban 3/4 ton with a ly6. I wasent sure what I needed for engine harness or harness mods. I work in a gm parts dept. so parts are pretty easy to get a hold of. just wondering if anyone has done it, if the would share a parts list. and would love some advice on cam valve springs etc going to be a daily driver so can't be too radical.
I haven't had it on the dyno but even with 19x12" wheel and 325/30/19 nitto's it will break the tires loose anytime in 2nd gear and have had it break the tires loose in 3rd at over 90mph. My seat of the pants guess is that it making in the 475-525 range at the wheel.
For accessory drive I used the GM LSA modified part # 19303242