ATI's supercharger PS1C kit and cam/valvetrain mod
06-27-2004, 02:10 AM
#1
Teching In
Thread Starter
Join Date: Jun 2004
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
ATI's supercharger PS1C kit and cam/valvetrain mod I think that I will upgrade my stock (only SFC added now) Z28 Camaro with ATI's supercharger P1SC 7psi kit with bigger injectors, intank fuel pump and programmer.
First I'll do cam and valvetrain mods.
What do you think if the camshaft is 2002-03 LS6 #12565308 204/218 .550"/.550" LSA 117.5 and Comp Cams valvetrain upgrade kit: 7.40" Hardened Pushrods, 918 Valve Springs Good to .600" Lift, 772 Titanium Valve Spring Retainers, 875 "R" Hydraulic Roller Lifters ?
Is these good mods for the supercharger? I think that I'll drive some months without tuning and only with cam/valvetrain mod.
When I buy this supercharger kit from ATI and some longtube headers (maybe hookers 1 3/4"), can I use the programmer from the kit for these mods?
I think that I'll change the revlimiter little higher, maybe 6600? And maybe some gear ratio changes ..?
First I'll do cam and valvetrain mods.
What do you think if the camshaft is 2002-03 LS6 #12565308 204/218 .550"/.550" LSA 117.5 and Comp Cams valvetrain upgrade kit: 7.40" Hardened Pushrods, 918 Valve Springs Good to .600" Lift, 772 Titanium Valve Spring Retainers, 875 "R" Hydraulic Roller Lifters ?
Is these good mods for the supercharger? I think that I'll drive some months without tuning and only with cam/valvetrain mod.
When I buy this supercharger kit from ATI and some longtube headers (maybe hookers 1 3/4"), can I use the programmer from the kit for these mods?
I think that I'll change the revlimiter little higher, maybe 6600? And maybe some gear ratio changes ..?
