flowtech manifolds or similar
Thread Starter
On The Tree
Joined: Mar 2017
Posts: 185
Likes: 0
From: Houston
flowtech manifolds or similar When using either the cheap Ebay, flowtech or OBX turbo headers, are they ONLY able to face up and forward? or are they able to be mounted down and forward? Common sense says that the engine mount would get in the way, but from the pictures ive seen it looks like it may clear. Anyone out there ever try it? havent seen any pictures oh people doing it that way that arent using motor plates.
p.s.
im not running AC or Power steering.
p.s.
im not running AC or Power steering.
TECH Enthusiast
iTrader: (14)
Joined: Mar 2008
Posts: 652
Likes: 12
From: Valley Lee, MD. Southern Maryland
I'm guessing the turbo headers are for a 4th gen F-body? I would contact Holley, Summit, and Jegs and ask them or try and find measurements to see how far away from the block they sit and how far down. For $200 or less for bare stainless or $300 or less coated you could always return them if they don't work. It's a PITA to return but it's not like your asking about a $1,200 item.
Thread Starter
On The Tree
Joined: Mar 2017
Posts: 185
Likes: 0
From: Houston
I'm guessing the turbo headers are for a 4th gen F-body? I would contact Holley, Summit, and Jegs and ask them or try and find measurements to see how far away from the block they sit and how far down. For $200 or less for bare stainless or $300 or less coated you could always return them if they don't work. It's a PITA to return but it's not like your asking about a $1,200 item.
