LSA Supercharger front snout
06-11-2017, 01:38 PM
#1
Teching In
Thread Starter
Join Date: Jun 2017
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
LSA Supercharger front snout I was wondering if anyone has produced a LS9 to LSA supercharger front snout conversion? I know there is one developed to put a LSA snout onto a LS9 supercharger. I need the LS9 snout and accessories on a LSA for a engine swap, as space in front of the engine is at a premium. Thanks in advance for any help
06-12-2017, 12:04 PM
#2
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 16 Likes
on
16 Posts
Wegner Front Drives Hi, Casey Wegner makes the best front drive for LS engines.
Not sure for your needs, call Wegner Motorsports (920-394-3557)
HIS design places the Blower Belt FIRST the closest one to the front cover.
Lance
Not sure for your needs, call Wegner Motorsports (920-394-3557)
HIS design places the Blower Belt FIRST the closest one to the front cover.
Lance
Last edited by pantera_efi; 06-12-2017 at 12:05 PM. Reason: spell
06-13-2017, 06:31 PM
#3
Teching In
Thread Starter
Join Date: Jun 2017
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the feedback @ Pantera EFI I may look into them but what I need is a LSA snout with the drive pulley spaced inward like a LS9 so I can use the LS9 accessories which brings everything closer to the front of the block. If I cant find the part produced by a shop, or a shop willing to produce the part. I will buy a LS9 and LSA blower snout along with the crank pulleys and see what I can do myself to make what I need.