Project Nova - The quest for 1000hp VS s480 l33 347
#221
That is my plan, I’m going to try and run the stock pump, I have 1 1/2 Line though. I should be able to let you guys know soon, I’m hoping to fire the car up this weekend.
I’m stuck here, should the steam vents gonall
The way to the back to the expansion tank? It seems like they should to me.
I’m stuck here, should the steam vents gonall
The way to the back to the expansion tank? It seems like they should to me.
#222
Well I hope I don’t have to touch my fuel system for a very long time, except for pumps.
Dual 8an lines to dual Bosch 044 pumps (upgrading to 380 or maybe 450’s if needed)
Dual out and then Y into 5/8 tubing to the front where it y’s back out dual 8an into the back of each rail, runs thru the rails and
Then dual 8an down into the regulator, then 1/2 tube back to the tank. Running the pumps on 30# base fuel pressure to stretch these pumps out as far as I can, 210# injectors. Was freaking expensive, mainly because I changed my mind 50 times along the way. One major hurdle down on the way to starting it this weekend. Also completed my hydroboost install sans 1 bulkhead fitting I’m waiting on.
Dual 8an lines to dual Bosch 044 pumps (upgrading to 380 or maybe 450’s if needed)
Dual out and then Y into 5/8 tubing to the front where it y’s back out dual 8an into the back of each rail, runs thru the rails and
Then dual 8an down into the regulator, then 1/2 tube back to the tank. Running the pumps on 30# base fuel pressure to stretch these pumps out as far as I can, 210# injectors. Was freaking expensive, mainly because I changed my mind 50 times along the way. One major hurdle down on the way to starting it this weekend. Also completed my hydroboost install sans 1 bulkhead fitting I’m waiting on.
Last edited by Cwarta; 11-21-2017 at 03:01 PM.
#224
Man am I a happy guy tonight! Finally got my new dash lit up and the boost controller! So stoked! Got my extra modules installed as well and the speed, oil, fuel pressure, and water temp wires up!!! Had to include. Photo of my comfy wiring space also haha
Also installed a bleeder in the top of the wTer pump.
Looking more ore and more promising for this weekend to be the first fire!
#226
Ive been meaning to ask about the GTo rack too!! Give up the details man!! LOL!!!
Also, i wanted to ask about your downpipe size, since our 2 builds are about identical, what size are you running? I found a 5 inch clamp to hold the flange to the turbo, but it either is 5" or necks down to 4,,,,, and i have room for 4.5 so id like to run max i can, but then, i cant seem to find 4.5 exhaust tubing online!!
Who did you get the flange from? I saw Little john has them so figured id order my cam and those other things together.
Are you gonna post the first crank!!!????
Week end is coming in hot!!!
Lead.
Also, i wanted to ask about your downpipe size, since our 2 builds are about identical, what size are you running? I found a 5 inch clamp to hold the flange to the turbo, but it either is 5" or necks down to 4,,,,, and i have room for 4.5 so id like to run max i can, but then, i cant seem to find 4.5 exhaust tubing online!!
Who did you get the flange from? I saw Little john has them so figured id order my cam and those other things together.
Are you gonna post the first crank!!!????
Week end is coming in hot!!!
Lead.
#229
Ive been meaning to ask about the GTo rack too!! Give up the details man!! LOL!!!
Also, i wanted to ask about your downpipe size, since our 2 builds are about identical, what size are you running? I found a 5 inch clamp to hold the flange to the turbo, but it either is 5" or necks down to 4,,,,, and i have room for 4.5 so id like to run max i can, but then, i cant seem to find 4.5 exhaust tubing online!!
Who did you get the flange from? I saw Little john has them so figured id order my cam and those other things together.
Are you gonna post the first crank!!!????
Week end is coming in hot!!!
Lead.
Also, i wanted to ask about your downpipe size, since our 2 builds are about identical, what size are you running? I found a 5 inch clamp to hold the flange to the turbo, but it either is 5" or necks down to 4,,,,, and i have room for 4.5 so id like to run max i can, but then, i cant seem to find 4.5 exhaust tubing online!!
Who did you get the flange from? I saw Little john has them so figured id order my cam and those other things together.
Are you gonna post the first crank!!!????
Week end is coming in hot!!!
Lead.
Thanks man!
#230
Bunch more work done tonight, got the water pump modded and all ready to go, before thanksgiving tomorrow I’m going to Menards to get the rest of my rear mount radiator set supplies, making it work since it’s an hour away to the next town.
180* t stat for a sbc.
Also got my dash all set up so the gauges function for my first fire, I must say I’m glad I made this investment, this thing is trick. Also got my shift light wired up.
180* t stat for a sbc.
Also got my dash all set up so the gauges function for my first fire, I must say I’m glad I made this investment, this thing is trick. Also got my shift light wired up.