OLD 10.5 mustang to no prep terror street car
#184
TECH Enthusiast
Thread Starter
not as bad as you think. They move pretty fast so labor isn't crazy. For me, I am working alot right now so it would take me forever to get it done. It took me a year to get the tube front on, fill in the firewall and strut towers.
#187
TECH Enthusiast
Thread Starter
Got the tin installed. It pops. Kinda busy but the carpet etc will tone it down. Got the weight with everything but electronics and carpet. 2500lb with driver will definately not be an issue with rol up windows, stereo, door locks etc.
#191
TECH Enthusiast
Thread Starter
I will for sure. Probably be spring. I wont be able to post everything because it will be a no prep N/T race as well but i will show the process
#194
TECH Enthusiast
Thread Starter
#196
TECH Enthusiast
Thread Starter
Drove 9hrs today to go to LJRC to talk for 45min. Had to look at what was done make a few changes and go over radiator placement. Took some pics while I was there. It is close to being ready for pick up.
#199
TECH Enthusiast
Thread Starter
Finally got radiator. Got it mounted finally!!! It is 22x14in. I believe. Fit like a glove with a little modification of the lower rail. I think it will cool just fine.
should be ready for me to dis-assemble for polIsh, powdercoat, and ceramic coat soon.
should be ready for me to dis-assemble for polIsh, powdercoat, and ceramic coat soon.
#200
TECH Enthusiast
Thread Starter
Car is ready for pick up. Got to figure out how to get a day off so I can pick it up. I have to get everything apart for paint and powder coat. Also have to Install front grill and make an opening in the front bumper so the radiator can get some air.
Going to do something like this
Going to do something like this