JGS 50 WG spring
Thread Starter
Joined: Sep 2007
Posts: 4,188
Likes: 292
From: woodbine, md
JGS 50 WG spring Getting ready to find a location for my WG, access will be kind of tough once everything is in, so trying to get it close on the spring. I think it comes with the larger dia. spring, and they include a smaller one. I will be using the Hallman boost controller (with the remote cable).
Looking for maybe adj. up to 15 lbs boost, prob more in the 8-10 lb.
I ran this setup on my Buick, I thought I used just the smaller spring, but cant remember-anyone have experience with this WG/spring combo.
Are you guys running weaker springs, and boost to the top port.
Thanks
Looking for maybe adj. up to 15 lbs boost, prob more in the 8-10 lb.
I ran this setup on my Buick, I thought I used just the smaller spring, but cant remember-anyone have experience with this WG/spring combo.
Are you guys running weaker springs, and boost to the top port.
Thanks
The bigger spring is the lighter one and is roughly 7 psi. The smaller one is roughly 10psi. Both together gets you about 15. Usually, you can get about double over the installed spring with a boost controller depending on how you have it hooked up.
I run the smaller spring in my trucks and get about 9psi with it and then just turn it up from there.
I run the smaller spring in my trucks and get about 9psi with it and then just turn it up from there.
Thread Starter
Joined: Sep 2007
Posts: 4,188
Likes: 292
From: woodbine, md
I guess running the small spring, boost line to the top hole and vent the bottom would give me boost control, if something happened to the boost line it would fall back on just spring pressure.
