VS Racing 7875 - Restrictor Needed?
if you use the oil feed kit from VS it's slightly restricted.
just make sure your drain is a nice slope into the pan.
probably skip any sort of HV/HP pump too unless you have a built motor and the builder spec'd it
just make sure your drain is a nice slope into the pan.
probably skip any sort of HV/HP pump too unless you have a built motor and the builder spec'd it
TECH Enthusiast
Joined: Dec 2016
Posts: 547
Likes: 49
From: Texas
ive been running the ebay gt45 for almost 3 years now with the feed drilled out to whatever the id of the feed is and i havnt had any issues. the hole that was in it was very very small thats why i drilled it.
Thread Starter
Teching In
Joined: Apr 2018
Posts: 11
Likes: 0
I’ll be making my own feed/drain lines. I’m in Canada so because the cost of shipping and the exchange rate it’s a lot cheaper to buy that kinda stuff locally. Will probably install a moderate restrictor.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
