blk99camaro

iTrader: (9)

Has any body done a stand up radiator that has a removable support? Thinking I'm going to Fab something up, but looking for some ideas and pictures of how you all have done it before. Below are some great Camaro examples, any 'bird owners with similar that work with our headlights?

Thanks!

Jon

MY_2K_Z

iTrader: (1)

Yep, I'm sure it would look better if it were all round tubing but I had square so I used it.

MM98

iTrader: (13)

That's **** man, I like that!

blk99camaro

iTrader: (9)

AAAAnnnddd just when I thought I had mine all planned out.... I like that setup. Will it work with the stock hood and latch?

MY_2K_Z

iTrader: (1)

Ya originally I had the stock latch but then I went to aero catch hood pins

MY_2K_Z

iTrader: (1)

The important part is make sure the upper bumper support where it meets the hood is perfect or your hood and bumper won't line up.

B18B1LS1

iTrader: (12)

MY_2K_Z

iTrader: (1)

Now why'd you have to come in here and make me look bad. Jk nice setup man looks great.

blk99camaro

iTrader: (9)

That's a damn nice setup! Any firebird guys done so I like this? Went a took some measurements and it doesn't appear these sethps will clear the headlights on a bird. 😥

B18B1LS1

iTrader: (12)

Thanks guys. It's nice to pull the front off and have easy access to service anything or pull the engine straight out. My2kZ yours looks good too!

MY_2K_Z

iTrader: (1)

Yep that's why I did it. Now when I need to work on it I just unbolt it and remove the radiator, fans, and intercooler all in one piece and I can walk right up to the motor to work on it.

blk99camaro

iTrader: (9)

bump for the Trans Am guys??

Cwarta

iTrader: (12)

01ssreda4

iTrader: (96)