WS6 #3392

I finally got everything done and got it on the dyno. All mods are in sig. Before D1X installed it made 440hp, 399tq. With 9# boost I gain 185 hp and 100tq. Total was 625hp, 499tq. Has a very safe tune with a Snow Performance Stage 2 Water and Methanol injection. Waiting for the track to open and get some new 1/4 times.

007FJ

iTrader: (28)

klinznilk

iTrader: (8)

Nice numbers. Similar setup here but only on 7ish pounds of boost.

BCNUL8R

iTrader: (2)

Nice!!!

Detoxx03

iTrader: (14)

WS6 #3392

We changed out the Snow performance boost juice today for M1 methanol. Picked up another 20hp and 8tq. Nothing changed in the tune. Timing is at 19 degrees. New numbers are 645/507!

forcd ind

iTrader: (7)

Cool numbers, should be a bad ride-I kind of miss my Prochargers, always had good
bottom end power, and I like the whine, lol.

BCNUL8R

iTrader: (2)

So you gained about 22 rwhp per pound of boost? That's pretty darn efficient for a belt driven centrifugal.

WS6 #3392

I hadn't figured it up like that. But yes I have gained 22 hp per pound of boost. Can't wait to get it on the track when it opens.

Detoxx03

iTrader: (14)

WS6 #3392

After doing my experiment with the two I agree 100%.

Bob@BruteSpeed

iTrader: (16)

I agree! Bob

Bob@BruteSpeed

iTrader: (16)

You have a nice combination, congratulations! Bob

WS6 #3392

I have to thank you again for the help. You helped me with my first build several years ago with my first WS6/procharger build, and you were there this time to help me get everything I needed again. Thank you Bob!

Bob@BruteSpeed

iTrader: (16)

You're welcome, thanks!! Bob

qweedqwag

More boost, more boost, more boost.

RedDeadG8

iTrader: (3)

doesnt torque look low for the hp its making?

LilJayV10

iTrader: (39)

That's what we normally see. Procharger has a great program.

BCNUL8R

iTrader: (2)

I agree...I love my D1x.