Summit ls turbo cams?
TECH Senior Member
Joined: Jun 2016
Posts: 22,298
Likes: 3,619
From: Central Cal.
BTW, dont let the smallish spec of the stage one ghost cam fool you. it pulls just as high of rpm as my bigger cam did. i think the lobe design of this cam is just much better. it pulls to 7000-7200 rpm in my 5.7 with a billet 7875. You dont need to pull it this high, I just like rpm myself.
BTW, dont let the smallish spec of the stage one ghost cam fool you. it pulls just as high of rpm as my bigger cam did. i think the lobe design of this cam is just much better. it pulls to 7000-7200 rpm in my 5.7 with a billet 7875. You dont need to pull it this high, I just like rpm myself.
Andrew
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I just received this cam. It is currently on sale at Summit. I couldn't resist. I have 7.400" pushrods now, which gave me good preload with the ASA cam. Just want an idea of what I am getting into before I tear into it in the driveway...LOL
Andrew
Only thing I can tell you is
1) I have .050 longer than stock because that’s what my other cam needed
2) no I didn’t check it
3) yes it runs fine and pulls to 7000
4) no I don’t care that I didn’t check it.
1) I have .050 longer than stock because that’s what my other cam needed
2) no I didn’t check it
3) yes it runs fine and pulls to 7000
4) no I don’t care that I didn’t check it.
Andrew
I kind of miss my old blow thrus, always were bullet proof. Had a CSU carb on the
6.0/Procharged, ran so good everybody thought it was FI'ed, lol. I hope to fire mine up
next week. I ended up with 7.350 PR's, but it was a 6.0, stage 2, but LS3 heads. You always
have to ck, decking, etc, every combo is diff.
6.0/Procharged, ran so good everybody thought it was FI'ed, lol. I hope to fire mine up
next week. I ended up with 7.350 PR's, but it was a 6.0, stage 2, but LS3 heads. You always
have to ck, decking, etc, every combo is diff.
TECH Apprentice
Joined: Jul 2017
Posts: 312
Likes: 14
From: Stephens city VA
I kind of miss my old blow thrus, always were bullet proof. Had a CSU carb on the
6.0/Procharged, ran so good everybody thought it was FI'ed, lol. I hope to fire mine up
next week. I ended up with 7.350 PR's, but it was a 6.0, stage 2, but LS3 heads. You always
have to ck, decking, etc, every combo is diff.
6.0/Procharged, ran so good everybody thought it was FI'ed, lol. I hope to fire mine up
next week. I ended up with 7.350 PR's, but it was a 6.0, stage 2, but LS3 heads. You always
have to ck, decking, etc, every combo is diff.
