When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Why do you need a prototype for dimensions? Don't you have a 3D model of these with dimensions?
Andrew
It has to do with a Non-Disclosure Agreement on electronic files. We've now scanned in the LS on our own and will be able to disseminate that information without approval from the owner of the CAD models
It has to do with a Non-Disclosure Agreement on electronic files. We've now scanned in the LS on our own and will be able to disseminate that information without approval from the owner of the CAD models
I wonder how much it would take. They make K member spacers to gain more cowl/hood clearance for blowers, wonder if the same could be used for these manifolds.
I've ordered one, even though I've gone out an eyeballed my 96 z28 with a screen shot of the manifold in my hand to compare. As is, yeah, there's no way short of sawing into the cowl. But I'm going to see if I can mount an offset on it that will get it away from the cowl enough to get it on there. I need things to mess with during bad weather. Still finishing my current twins for the moment.
Hey guys, how's the production coming along on these?
Thanks!
Hello all! We received the first samples and have submitted changes to the foundry. The COVID-19 situation has delayed our second production proofing samples a bit and we're going to be behind schedule on pre-order delivery.
We'll have 2nd production sample ETA this week and then will provide an up to date timeline on delivery schedule.
03-21-2020, 02:11 PM
