Injector Question
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Injector Question I currently have 42lb injectors in my 99z, but am wondering how much hp they are capable of handling. The car has a t-76 setup from TTI and I'm looking to push 600rhwp. I know this is very attainable, but didn't know if I actually needed some bigger injectors or not.. ANy help is greatly appreciatied.
Thanks
Thanks
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by smokinHawk
a few members have pushed them past 600rwhp
they should work, but not much more past that.
if you want to be safe get some 57's or 60's
they should work, but not much more past that.
if you want to be safe get some 57's or 60's
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by Cmarsh93z
Who installed the T-76? When it left the shop, the car had a 63 on it. Have you dynoed it since you got it?
Chris
Chris
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
I would get either the 57's or the mototron 60's.
The 57 arent that much cheaper than the 60's, and the 60's will hold more power, and give you room to grow in the future.
What is the inlet size on the turbo? and the discharge tube will be a different size if it is a t-76 kit, than the t-60 kit
if you need to see the discharge pipe I have one here at the house, and an old DP if you want it.
Thanks
ed
The 57 arent that much cheaper than the 60's, and the 60's will hold more power, and give you room to grow in the future.
What is the inlet size on the turbo? and the discharge tube will be a different size if it is a t-76 kit, than the t-60 kit
if you need to see the discharge pipe I have one here at the house, and an old DP if you want it.
Thanks
ed
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by 69firebird
I would get either the 57's or the mototron 60's.
The 57 arent that much cheaper than the 60's, and the 60's will hold more power, and give you room to grow in the future.
What is the inlet size on the turbo? and the discharge tube will be a different size if it is a t-76 kit, than the t-60 kit
if you need to see the discharge pipe I have one here at the house, and an old DP if you want it.
Thanks
ed
The 57 arent that much cheaper than the 60's, and the 60's will hold more power, and give you room to grow in the future.
What is the inlet size on the turbo? and the discharge tube will be a different size if it is a t-76 kit, than the t-60 kit
if you need to see the discharge pipe I have one here at the house, and an old DP if you want it.
Thanks
ed
cool,
I havent gotten the pics yet, but Ill look at em. I am pretty sure that the 60 didnt have a 4" inlet, so I would bet that you have the 76. My TTi 60 was only like a 3" inlet, I have the old elbow somewhere, Ill try to find it and measure
ed
I havent gotten the pics yet, but Ill look at em. I am pretty sure that the 60 didnt have a 4" inlet, so I would bet that you have the 76. My TTi 60 was only like a 3" inlet, I have the old elbow somewhere, Ill try to find it and measure
ed
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by 69firebird
cool,
I havent gotten the pics yet, but Ill look at em. I am pretty sure that the 60 didnt have a 4" inlet, so I would bet that you have the 76. My TTi 60 was only like a 3" inlet, I have the old elbow somewhere, Ill try to find it and measure
ed
I havent gotten the pics yet, but Ill look at em. I am pretty sure that the 60 didnt have a 4" inlet, so I would bet that you have the 76. My TTi 60 was only like a 3" inlet, I have the old elbow somewhere, Ill try to find it and measure
ed
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Launching!
Joined: Nov 2001
Posts: 289
Likes: 0
From: Dallas, Tx
Send the Email to me also...I would like to look at the turbo. There was a custom 63 on there, with a 4 inch inlet on it....looks like a 76, but isn't. I was there when we bought the turbo and installed it, so I will be able to tell you for sure.
Chris
Chris
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by Cmarsh93z
Send the Email to me also...I would like to look at the turbo. There was a custom 63 on there, with a 4 inch inlet on it....looks like a 76, but isn't. I was there when we bought the turbo and installed it, so I will be able to tell you for sure.
Chris
Chris
Thread Starter
TECH Enthusiast
Joined: Mar 2002
Posts: 602
Likes: 0
From: ft worth tx
Originally Posted by smokinHawk
here are the dimensions of the small frame T76
http://www.cofba.org/users/smokinhawk/T76/
http://www.cofba.org/users/smokinhawk/T76/
On The Tree
Joined: Feb 2002
Posts: 102
Likes: 0