T3-T04B on a mostly stock 4.8?
Thread Starter
TECH Junkie
Joined: Mar 2003
Posts: 3,272
Likes: 0
From: Katy, TX
T3-T04B on a mostly stock 4.8? A buddy of mine wants to put a T3-T04B on his 04' 4.8L. I know the T04B is good for 450rwhp, but can the truck run through a T3 exhaust housing? He isnt wanting to go huge with power, but he wants to get into the 330 rwhp range. He keeps bugging me to help him make the flanges, but i dont want to waist my time till i know if its even possible.
Thanks for any replies. Let the ripping begin.
Thanks for any replies. Let the ripping begin.
TECH Apprentice
Joined: Nov 2001
Posts: 306
Likes: 0
From: malmstrom Air Force Base, Montana
If he only wants to have 330 rwhp I would think it would be ok. Lots of imports do it right. 330hp is the same amount of exhaust ruffly whether its comming out of a 1.8L or a 4.8L right?
Why not go a bit larger.
I was looking on ebay and you can get some pretty decent sized turbos for fairly cheap.
Just might as well... going to be about the same cost involved and he would get a lot more out of a larger one.
I was looking on ebay and you can get some pretty decent sized turbos for fairly cheap.
Just might as well... going to be about the same cost involved and he would get a lot more out of a larger one.
