Dyno Numbers....any Guess'
Thread Starter
Under criminal investigation for fraud
iTrader: (-2)
Joined: Jan 2004
Posts: 1,350
Likes: 0
Originally Posted by Noyzee
the most it can make is what? about 30 psi or so?
hope you have a good tuner!!!
DFI or what?
hope you have a good tuner!!!
DFI or what?
It has a BS3 on it. Should be around 26-30psi. We'll see what the tuner can do!! What's teh worst ...... blow it up
Originally Posted by Chris@AP-Engineering
It has a BS3 on it. Should be around 26-30psi. We'll see what the tuner can do!! What's teh worst ...... blow it up
Get off the computer and dyno that thing and give us some #'s!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
RESULTS PLEASE 
Thread Starter
Under criminal investigation for fraud
iTrader: (-2)
Joined: Jan 2004
Posts: 1,350
Likes: 0
We needed a different water fitting, that is being machined up as we speak. The origional one had a little interference issue with the blower.
As soon as we have dyno numbers they will be posted.
2dozen, it has a Neil Chance converter.
Thanks guy's and stay tuned!!
As soon as we have dyno numbers they will be posted.
2dozen, it has a Neil Chance converter.
Thanks guy's and stay tuned!!
If he makes high 800's with a 6100 stall on his dyno, he will run low 8's. That would be a awsome starting point!
Kurt
Kurt
Originally Posted by NumberOneSled
I don't think they would be to happy with anything in the 800's
Banned
Joined: Dec 2002
Posts: 660
Likes: 0
From: Elgin, IL
Originally Posted by 427
If he makes high 800's with a 6100 stall on his dyno, he will run low 8's. That would be a awsome starting point!
Kurt
Kurt
I am guessing based on his dyno and mine are the same manufacturer, I have ran cars on his and mine and had the same numbers. I run a 69 camaro in our local 10.5 races, it weighs 3450-3500 with me in it. It will run around 825-830 at the wheels. It will also run 8.5x anywhere and 40's when its in the mood! He will be lighter raceweight and by high 800's I was guessing 875++
I think this will put him in the low 8's.
Kurt
I think this will put him in the low 8's.
Kurt
Originally Posted by 8seclt1
thats not necessarily true kurt... i make low 800s at 3125 and go 8.50s.... my stall is 6200 (1.25 60ft)
Banned
Joined: Dec 2002
Posts: 660
Likes: 0
From: Elgin, IL
Originally Posted by 427
I am guessing based on his dyno and mine are the same manufacturer, I have ran cars on his and mine and had the same numbers. I run a 69 camaro in our local 10.5 races, it weighs 3450-3500 with me in it. It will run around 825-830 at the wheels. It will also run 8.5x anywhere and 40's when its in the mood! He will be lighter raceweight and by high 800's I was guessing 875++
I think this will put him in the low 8's.
Kurt
I think this will put him in the low 8's.
Kurt
