Anyone have dimensions of 76 and 88mm
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,420
Likes: 0
From: Deep in the seedy underworld of Koonerville
Originally Posted by PTE
The PT88 is considered a medium frame turbo. It comes standard with our Hi Flow compressor cover that has a 4” inlet and a 3” outlet. This turbo falls between our PT76 and the PT91.5. The large frame turbos start with the PT91.5. The other measurements you are looking for are as follows.
From the edge of the inlet to edge of the outlet discharge, the measurement is 10 ¼”.
From the top to the bottom of the turbine housing is 8 ½”.
The Hi Flow compressor cover measures 8” from top to bottom when looking at the face of the cover. This Hi Flow compressor cover has a 4” inlet and a 3” outlet.
From the edge of the inlet to edge of the outlet discharge, the measurement is 10 ¼”.
From the top to the bottom of the turbine housing is 8 ½”.
The Hi Flow compressor cover measures 8” from top to bottom when looking at the face of the cover. This Hi Flow compressor cover has a 4” inlet and a 3” outlet.
