Gauging interest right, what do you guys think? We have 4-5 designs to choose from including the one we are using on our T88 shop car, as well as the one that Pro Stock John is running.

We are using this one on my T88 car, in our GT76 turbo kits, our YSi Camaro kit, and our D1SC front mount kit. It was designed for the 98+ Camaro front end. It also not has the mounting tabs which is NOT shown in the picture.
1-4 price $759.99
5-9 price $659.99
10+ price $589.99
#CS-000AE-3

This is Pro stock Johns, and also the same unit we install in the above kits, but with the 98+ Firebird/TA nose.
1-4 price $569.99
5-9 price $499.99
10+ price $459.99
#CS-000AE-1

1-4 price $909.99
5-9 price $804.99
10+ price $719.99
#CS-000AE-2

1-4 price $939.99
5-9 price $829.99
10+ price $739.99
#CS-000AE-4


We also have high flow twins, that mount similar to the ATI twin coolers. They are a much more efficient design, and are the same that INTIMD8 is running in his 850 RWHP LT1 twin turbo car. They are:
1-4 $999.99 per pair
5-9 $899.99 per pair
10+ $799.99 per pair.

WE can mix and match the above designs to reach the 10+ price
This will expire 2/13
email me direct to order
tom@ls1speed.com

Tom

Tom

 

Yes depending on cost.

 

Full specs on this? I couldn't find it on your page.

 

see above...

TOm

 

Hey,
was wondering if there was any chance of getting one with twin inlets, and a single outlet?
if so let me know via e-mail and a cost, Im looking to possibly upgrade my CAS kit
ed
firebird455@onebox.com

 

I'm intrested in #CS-000AE-3 or #CS-000AE-1, I would have to put a lot more thought into it before I made the choice.

 

Now you guys do a GP after alot of people have bought theres......

 

Email me your name, and I will see what I can do. It will mainly depend on how long ago you bought one....

Tom

 

The CS-000AE-3 is the one i reccomend for a Camaro. There are a few mounted pics toward the bottom http://www.ls1speed.com/eliminator.cfm

Tom

 

what about the dual inlet one?

 

Might not be a problem if you are just adding an outlet to one of the sides. If you are not trying to change the tanks around. Let Tom or myself know what you had in mind and i will get Tom a price on that addition.

 

well I just looked at the pics of what is posted up, and the only one that would work is basically the same as the one that I have already. I think that Im going to try it the way it is and if I end up needing something larger ill get back with TOM

thanks for the help
ed

 

Tom,

What are the dimensions on the twins? I assume they are two separate units??

Howard
Redline Motorsports

 

I'd like to purchase the #CS-000AE-1
how much hp is attainable with it..
and what has to be done to mount it. 2000 trans am.

also do you sell the plumbing?

squid2g@hotmail.com

Thanks,
David

 

You wouldn't happen to have a pic of a Camaro with the #CS-000AE-3 and the front bumper cover installed? I want to see what it looks like in everyday form.

 

David, we have made over 700 RWHP with this cooler through a TH400. IT wasnt finished either.

You will have to remove the bumper cover, and have brackets tig welded on. THe Camaro cooler (-03) now has them.

No plumbing right now

TOm

 

let me see what I can find.....

 

I will check with Griffin for the exact dimensions.

I have a pair of these on the shelf,a nd can ship ASAP.

 

Its not easy to see

 

Tom a PDF of the unit is on its way with the dimensions.