Blown Seal?
Blown Seal? I tested my DIY turbo kit last night and things went well, except for the 1/2 quart of oil that gushed out around my bell housing and all over the engine! I only drove the thing for 5 minutes, and it only saw 5psi.
I took the kit off, cleaned up the oil and ran it NA for a few minutes. There are still a few drips coming down from the top of the engine around the bell housing. It seems to run fine, no missing, lots of power etc. Did I blow a seal? I thought the PCV would be fine under 5psi?
I took the kit off, cleaned up the oil and ran it NA for a few minutes. There are still a few drips coming down from the top of the engine around the bell housing. It seems to run fine, no missing, lots of power etc. Did I blow a seal? I thought the PCV would be fine under 5psi?
