help
Thread Starter
TECH Enthusiast
iTrader: (20)
Joined: Nov 2003
Posts: 651
Likes: 0
From: north jersey
help is it ok to use a high heat rubber elbow between the throtle body and maf? or should i use a reinforced silicone which i cant find anywhere its 4'' by 3.5''
i am running 8 psi right now.i tried using a 3'' 90 degree elbow but there is not enough room between the throtlebody and radiator support.it has to be a really shrp bend for it to work.
any help or info will appreciated
thanks
armend
i am running 8 psi right now.i tried using a 3'' 90 degree elbow but there is not enough room between the throtlebody and radiator support.it has to be a really shrp bend for it to work.
any help or info will appreciated
thanks
armend
not sure but www.airflo.com has some
i had a rubber one on my turbotech kit, then bought a silicon one from QMP. not sure where they got it from, but they had it specially made.
i had a rubber one on my turbotech kit, then bought a silicon one from QMP. not sure where they got it from, but they had it specially made.
