More updates on the project
Thread Starter
Fiery Features Director
iTrader: (11)
Joined: Jan 2002
Posts: 3,830
Likes: 0
From: Houston, Tx
More updates on the project Last week we started getting the new rear end in the car. We decided to order different axles from Moser, so we are stuck here at the moment.
I didn't have to go to work on Friday, so I decided to pull the heads off the car so I could change the lifters. When Brian got home, he suggested that we paint the engine bay since I had the motor torn apart. We started on part of that today. I will get better pictures once we are finished.
While Brian and I were sanding and prepping the engine bay for paint, Dale mounted the boost controller.
I didn't have to go to work on Friday, so I decided to pull the heads off the car so I could change the lifters. When Brian got home, he suggested that we paint the engine bay since I had the motor torn apart. We started on part of that today. I will get better pictures once we are finished.
While Brian and I were sanding and prepping the engine bay for paint, Dale mounted the boost controller.
Thread Starter
Fiery Features Director
iTrader: (11)
Joined: Jan 2002
Posts: 3,830
Likes: 0
From: Houston, Tx
Originally Posted by NA$TY-TA
Lookin good........ what size axles were in there and what did ya go with now???
Kyle
Kyle
Originally Posted by Zangel
Last week we started getting the new rear end in the car. We decided to order different axles from Moser, so we are stuck here at the moment.
]
]
Originally Posted by Zangel
I didn't have to go to work on Friday, so I decided to pull the heads off the car so I could change the lifters. When Brian got home, he suggested that we paint the engine bay since I had the motor torn apart. We started on part of that today. I will get better pictures once we are finished.]
Originally Posted by Zangel
While Brian and I were sanding and prepping the engine bay for paint, Dale mounted the boost controller.
Originally Posted by Flipper
You have a nice rear end!
You're killing me! Just thinking to myself if I said to my wife "hey honey since you're off tomorrow why dont you pull the heads of my Truck?"
Very Nice!
You're killing me! Just thinking to myself if I said to my wife "hey honey since you're off tomorrow why dont you pull the heads of my Truck?"
Very Nice!
I with ya..
Im trying to teach mine...... Now if i can get her to change the slicks at the track im set... 
Kyle
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
damn!!! and lol@flipper. very nice zangel, ill just add that one to the list of things im jelous about...
number 78: factory looking boost installer
number 79: painted engine bay
number 80: moser rear end...
damn the list just keeps going
number 78: factory looking boost installer
number 79: painted engine bay
number 80: moser rear end...
damn the list just keeps going
What brand of housing and carrier did you go with? I am a ways away from getting a rear but i want a 9". What type of paint are you using for your engine bay? My motor and trans are still out so i think it would be a great time for me to freshen up the paint from the previous owner installing long tubes. Would i need to do anything special for the prep work? Lastly, you need to vacuum your floor. 
Greg
Greg
Thread Starter
Fiery Features Director
iTrader: (11)
Joined: Jan 2002
Posts: 3,830
Likes: 0
From: Houston, Tx
Originally Posted by disassembled
What brand of housing and carrier did you go with? I am a ways away from getting a rear but i want a 9". What type of paint are you using for your engine bay? My motor and trans are still out so i think it would be a great time for me to freshen up the paint from the previous owner installing long tubes. Would i need to do anything special for the prep work? Lastly, you need to vacuum your floor.
Greg
Greg
Thread Starter
Fiery Features Director
iTrader: (11)
Joined: Jan 2002
Posts: 3,830
Likes: 0
From: Houston, Tx
Originally Posted by Flipper
Yeah looks like you have part of a Big Mac under your floor mat!
Nah, that is a big ole leaf you are looking at. I don't allow anyone to eat or drink anything in my car.
Thread Starter
Fiery Features Director
iTrader: (11)
Joined: Jan 2002
Posts: 3,830
Likes: 0
From: Houston, Tx
Originally Posted by KingCrapBox
Ricer!
Looking good...
Looking good...
sb427f-car - you should be able to relocate the traction control. If you have an aftermarket radio, you should be able to put the button below it. Otherwise, Brian said something about buying the LT1 knee bolster. Not sure if that would fit, but it has a space that they used for the rear window defroster switch. Someone could give it a try and see if that works.