My install ...finished
Well got the SPEC stage 5 installed 
I had this abnoxious squeal for the first couple weeks but it has since worked it's way out to be WWWAAYYYY, less noticable.
Here's what it sounded like with the squeal:
http://home.comcast.net/~camaro2002s...C_V_Squeal.wmv
Hoping to get this on the dyno in mid June now.
I also wasn't seeing the boost that I wanted with the 4.0 pulley so I've got a 3.7 pulley that I will be installing next week along with a new belt. I also had an 02 sensor bung welded into the center of my x-pipe so that when I dyno we can put the wideband sensor right in there instead of using a sniffer
Pics to come
I had this abnoxious squeal for the first couple weeks but it has since worked it's way out to be WWWAAYYYY, less noticable.
Here's what it sounded like with the squeal:
http://home.comcast.net/~camaro2002s...C_V_Squeal.wmv
Hoping to get this on the dyno in mid June now.
I also wasn't seeing the boost that I wanted with the 4.0 pulley so I've got a 3.7 pulley that I will be installing next week along with a new belt. I also had an 02 sensor bung welded into the center of my x-pipe so that when I dyno we can put the wideband sensor right in there instead of using a sniffer
Pics to come
Well after going through all of my WOT logged 1/4 mile runs. It looks like this FMIC is doing a great job for IATs. With 6lbs of boost my average IAT temp is only 18 degrees above ambient. At peak which was after back to back runs at the track the temp was 25 degrees above ambient. I expect this to go up when I put the new 3.7 pulley on this week, as I'm hoping to see around 9-10lbs of boost.
So far my track times have been unsatisfactory and I need help with traction and getting rid of this damn wheel hop!! Best 60' I've been able to pull is a 2.1 on nitto 555r's and that run yielded a 12.8 @ 116mph. I've also managed to run a 12.7 @ 115 with a 2.3 60', LOL
So far my track times have been unsatisfactory and I need help with traction and getting rid of this damn wheel hop!! Best 60' I've been able to pull is a 2.1 on nitto 555r's and that run yielded a 12.8 @ 116mph. I've also managed to run a 12.7 @ 115 with a 2.3 60', LOL
Link not working anymore. Can someone repost/host please? 
Originally Posted by 2K2CamaroSS
The Video....... (pay no attention to the people talking in the video, LOL.)
http://home.comcast.net/~camaro2002ss2/2K2CamaroSS.wmv
http://home.comcast.net/~camaro2002ss2/2K2CamaroSS.wmv
On The Tree
Joined: Nov 2004
Posts: 158
Likes: 0
From: Bay Area
Originally Posted by Rick@Synergy
Flooring it already? Yikes!!!!
I just tuned another one of our FMIC cars yesterday, and with the idle, you should set yours around 40 IAC counts to help out. With our 7.25 crank, and 3.4 pulley on the P1SC, I see 11.5PSI at 6100RPM. Add some running Air/Flow if they doesnt help also.
Rick
I just tuned another one of our FMIC cars yesterday, and with the idle, you should set yours around 40 IAC counts to help out. With our 7.25 crank, and 3.4 pulley on the P1SC, I see 11.5PSI at 6100RPM. Add some running Air/Flow if they doesnt help also.
Rick
That sounds like it was my car.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
