TEA Stage 2 Heads for my setup?
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
TEA Stage 2 Heads for my setup? I talked to TEA today and they reconmend I use the 5.3's on my forged 347 setup for low compression. I just want you guys opinions on that advice. 
I had 6.0l heads from FFHP but I returned them because they sent me the wrong heads. Just want some input from the blown crowd.
Thanks
Joe M
I had 6.0l heads from FFHP but I returned them because they sent me the wrong heads. Just want some input from the blown crowd.Thanks
Joe M
i wouldn't use a 5.3L head for low compression...6.0L heads are for low compression...and 5.3L heads are for high compression...but i don't know why tea would tell you that if it wasn't good for your combo
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Originally Posted by TApimp
It depends on what kind of piston your running.......
Diamond reverse dome. I will have all the engine specs tomorrow. I have to go and decide. Its between JE pistons and Diamond. Using all ARP bolts to build it and callies connecting rods with the stock crank.
I am running the TEA 5.3 heads with fairly large chambers and over a 25 cc dished piston. That will give plenty low enough compression. 
Let us know your combo better because it does all depend on the pistons.
Let us know your combo better because it does all depend on the pistons.
Thread Starter
9 Second Club
iTrader: (17)
Joined: Nov 2002
Posts: 4,997
Likes: 0
From: New Braunfels ,Tx
Originally Posted by nitrorocket
I am running the TEA 5.3 heads with fairly large chambers and over a 25 cc dished piston. That will give plenty low enough compression.
Let us know your combo better because it does all depend on the pistons.
Let us know your combo better because it does all depend on the pistons.
