2 Bar Map sensor?????
As y2khawk said the numbers posted above are for a BARO sensor not the map sensor.
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
12614973 = MAP sensor for Cobalt SS = $45
The actual MAP sensor is said to have a different connector on it but it looks the same as the pictures above. It even includes a new grommet unlike the BARO sensor. So why can't we use this one? is it because it includes a temp sensor?
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
12614973 = MAP sensor for Cobalt SS = $45
The actual MAP sensor is said to have a different connector on it but it looks the same as the pictures above. It even includes a new grommet unlike the BARO sensor. So why can't we use this one? is it because it includes a temp sensor?
so to be clear can i use the 12614973?
transammiller you need this one
This is the sensor that plugs DIRECTLY INTO THE FACTORY HARNESS, no cutting or splicing needed
GM PN 12580698
New PN for the above sensor, seems GM updated the PN.
12615136
I'm only posting this for the newbs out there who still might not know what PN to order or ask for from the dealership.
Vetal, good luck with your search for someone to send you the sensor, shouldn't be too much trouble for a company to do.
GM PN 12580698
New PN for the above sensor, seems GM updated the PN.
12615136
I'm only posting this for the newbs out there who still might not know what PN to order or ask for from the dealership.
Vetal, good luck with your search for someone to send you the sensor, shouldn't be too much trouble for a company to do.
yeah, is the cobalt map useable if you get the right plug and do the wiring? some people might have a use for another temp sensor, so saying that the map is wrong isnt helpful.
if you can use the iat from it and it'll take care of the map reading, then that would be preffered over the baro sensor and still having to mount an iat somewhere.
if you can use the iat from it and it'll take care of the map reading, then that would be preffered over the baro sensor and still having to mount an iat somewhere.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Staging Lane
Joined: Jan 2011
Posts: 50
Likes: 0
2.5 Bar map sensor direct fit
AC Delco partnumber #213-796
GM Partnumber 12614973
I tried it on may Fast LSXR/T intake its direct fitment and no pigtail
I thought of just throwing the part number if someone did not find it..
AC Delco partnumber #213-796
GM Partnumber 12614973
I tried it on may Fast LSXR/T intake its direct fitment and no pigtail
I thought of just throwing the part number if someone did not find it..
now i know the GM 2 bar i should be using is her one of these
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
however has anyone tryed this one?
http://www.ebay.com/itm/321046781874
its assembled like the ones above, but was wondering it it matters? is a 2 bar sensor a 2 bar sensor? if they are built the same of course. does it affect the tune?
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
however has anyone tryed this one?
http://www.ebay.com/itm/321046781874
its assembled like the ones above, but was wondering it it matters? is a 2 bar sensor a 2 bar sensor? if they are built the same of course. does it affect the tune?
now i know the GM 2 bar i should be using is her one of these
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
however has anyone tryed this one?
http://www.ebay.com/itm/321046781874
its assembled like the ones above, but was wondering it it matters? is a 2 bar sensor a 2 bar sensor? if they are built the same of course. does it affect the tune?
12580698 = 2bar BARO sensor for Cobalt SS (old number)
12615136 = 2bar BARO sensor for Cobalt SS (updated number) = $95 from the dealer
however has anyone tryed this one?
http://www.ebay.com/itm/321046781874
its assembled like the ones above, but was wondering it it matters? is a 2 bar sensor a 2 bar sensor? if they are built the same of course. does it affect the tune?
Teching In
Joined: Oct 2021
Posts: 47
Likes: 18
****** A, I can't make it anymore clear than this post guys:
https://ls1tech.com/forums/11692808-post27.html
I have a flippin pic of the damn sensor with the PN listed on it, and I also list BOTH of the PN's old and new SO YOU CAN ORDER/BUY the right one.
I also have the PN's listed in the turbo FAQ.
YOU NEED THIS SENSOR:
12580698 or THIS PN 12615136
THEY ARE BOTH THE SAME SENSOR WITH AN UPDATED PN (PART NUMBER)
Onfire, thanks buddy.
J
https://ls1tech.com/forums/11692808-post27.html
I have a flippin pic of the damn sensor with the PN listed on it, and I also list BOTH of the PN's old and new SO YOU CAN ORDER/BUY the right one.
I also have the PN's listed in the turbo FAQ.
YOU NEED THIS SENSOR:
12580698 or THIS PN 12615136
THEY ARE BOTH THE SAME SENSOR WITH AN UPDATED PN (PART NUMBER)
Onfire, thanks buddy.
J
