spittin o2 sensors. need help!
Thread Starter
On The Tree
Joined: Nov 2004
Posts: 158
Likes: 0
From: Bay Area
spittin o2 sensors. need help! Since we kicked the boost up to 11.5, I keep spittin out my driver side O2 sensor. I make sure that it is tight as hell but it still spits out. The thread is not shreded on the header. I was thinking of putting some lock tight or something. What do you guys think. All suggestions welcome. 
Thread Starter
On The Tree
Joined: Nov 2004
Posts: 158
Likes: 0
From: Bay Area
Didn't get a chance to check it because it flew of the car. It blew out in the middle of a race with a 480rwhp cobra. I won by the way. The sensor is some where on Alvarado Niles Rd. in Union City.
How did it unhook from the wiring harness. Those clips are pretty strong? I guess the bigger question is how did it come out of the pipe 
Try some blue loctite. It is mild and you'll be able to break the sensor loose when its time to change out.
Try some blue loctite. It is mild and you'll be able to break the sensor loose when its time to change out.
Originally Posted by redline.inc
Thanks man. I didn't even know that there was different versions of loctite.
