ATI procharger install questions

Reply Subscribe

Thread Tools

Search this Thread

May 23, 2005 | 09:33 PM

matrepk

Thread Starter

Teching In

iTrader: (8)

Joined: Apr 2004

Posts: 20

Likes: 0

From: Wisconsin

ATI procharger install questions

I know everyone says that the Ati fan wiring that is in the procharger manual is wrong. So what is the correct wiring for the fan? What should I install for the pcv valve, should i install a catch can? Also should i get a different bov that is open to the atmosphere to vent the hot gas?
Thanks for any help.

May 23, 2005 | 09:45 PM

00SSQuiniqua

Staging Lane

iTrader: (2)

Joined: Mar 2004

Posts: 69

Likes: 0

From: milwaukee

Quote:

Originally Posted by matrepk

I followed the wiring diagram provided in the manuel, and have had zero problems. I also did the same for the PCV system, but I would add a breather to help vent any crankcase pressure. As far as the bypass valve, if you install the way the manuel says, it will recirculate hot air. I just removed the tube from the bypass valve and vented it to the atmosphere. Then just plug the hole on the inlet hat.

May 24, 2005 | 12:32 PM

Blown SS

10 Second Club

iTrader: (13)

Joined: Jan 2005

Posts: 334

Likes: 0

From: J'ville, NC

The wiring diagram was right on with my install . I also have my stock ATI bypass installed to vent, not recirculate , supposed to keep the IAT's down and it sounds cool too .