guys that are building there own kits, please read
Thread Starter
Staging Lane
Joined: May 2005
Posts: 82
Likes: 0
guys that are building there own kits, please read We now sell mandrel bends ranging from 1"-4" in mild steel. Along with that we also have flanges, v-band clamps, basically all building material. We also carry a wide range of wastegates, bov, boost controllers, and Precision turbos, all at very competitive prices. We've been getting alot of calls lately about materials so I thought I might spread the word a bit
Originally Posted by GroundZero
We now sell mandrel bends ranging from 1"-4" in mild steel. Along with that we also have flanges, v-band clamps, basically all building material. We also carry a wide range of wastegates, bov, boost controllers, and Precision turbos, all at very competitive prices. We've been getting alot of calls lately about materials so I thought I might spread the word a bit
Thread Starter
Staging Lane
Joined: May 2005
Posts: 82
Likes: 0
I've never bought any aluminum bends. I'll check to see if they carry those
All these little pieces probably will not be on the site. This is a type of deal where you have to call and let me know what you need
Yes, I can merge 2 45*angles into one pipe. Just did that the other day to one of our cars
All these little pieces probably will not be on the site. This is a type of deal where you have to call and let me know what you need
Yes, I can merge 2 45*angles into one pipe. Just did that the other day to one of our cars
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by GroundZero
Yes, I can merge 2 45*angles into one pipe. Just did that the other day to one of our cars
Keith
Originally Posted by SMOKINHAWK
Last edited by smokinHawk : Today at 07:29 AM. Reason: non sponser link
So if it isn't a service or part offered by one of our sponsors, I can list the link as a helpful source of info to my fellow members....
Originally Posted by frcefed98
Ahh, from what i've seen here on the board, none of our sponsors offer aluminum tubing for sale or list it on their websites. If they do I missed it. GZM isn't sure if they can get it or not.
So if it isn't a service or part offered by one of our sponsors, I can list the link as a helpful source of info to my fellow members....
So if it isn't a service or part offered by one of our sponsors, I can list the link as a helpful source of info to my fellow members....
besides your link was bad, it didnt need the - you had in it originally.
