Procharger D1SC tuner guys in here please.......
Procharger D1SC tuner guys in here please....... Well my setup is the twin intercooler, D1SC, im going to go with the SDCE 8 Rib setup, heres my question, What else did you guys do and use? Its going on a stock LS1 motor for now so keep that in mind. I already have the bigger in tank fuel pump and plan to run about 8 lbs. What injectors, who tuned it and wha type of tune? FMU or Different method, i want to hear your setups down to the T and also who tuned it etc. Thanks a ton, also keep in mind im stock.
C
C
FormerVendor
Joined: Aug 2005
Posts: 531
Likes: 0
From: Decatur IN.
I would run the ford SVO 42# injectors,stay away from the FMU.You should find a tuner close to you with a chassis dyno and wideband air fuel metering.The ATI kit will be complete sans injectors and you already have a pump,8#boost on stock should net 430 hp easily...I would take it EPP for the tune....hehe
Go with the 60lbs injectors. I had 42lbs before and maxed them out and had to change to 60lbs injectors. Tunning can be done via softwares such as HPtuners, EFI FlashScan and LS1Edit. Just take it to a tuner who uses any of these and u will be fine. GOod luck.
