NA$TY-TA

iTrader: (21)

itsthe same guy im thinking of right ed.... he made it for that twin turbo car also........ i was going to go with that one.... but some body talked me into something else.

Any more updates???
Kyle

69firebird

iTrader: (14)

Kyle,
Yeah its the same guy you were thinking of he did do the one for the TT guy, I contacted him and he put me in touch with Aaron. Hes a great guy, when he sent it back he didnt include my TB, he overnighted the TB and refunded part of what I paid him for the inconvience, and I didnt ask for any of that. Just wanted the TB back

here is his e-mail addy, if you want to get ahold of him.

aaron_460@hotmail.com

THanks
ed
firebird455@gmail.com

1a-play

iTrader: (9)

Ed, what's pistons are you using with the 5.3 heads?

69firebird

iTrader: (14)

Wiseco 8:1's off the shelf part, its like a -26 or 28cc dish, so im shooting for a bit less than 8.5:1 total compression

1a-play

iTrader: (9)

part number for those?

69firebird

iTrader: (14)

I thougt you were getting rid of your turbo kit, decided to keep it?

its a -25cc reverse dome, their website catalog says its 8.9:1 with 5.3 heads but if you use a compression calculator it doesnt say that with a .045 gasket its 8.4 and with a .055 gasket its a 8.25 motor.

the part number is k392a07

Call eric at HPE, he's who I bought mine through, I bought all the parts and then took them all back to him to have him do the engine work. He will take care of you for sure.

link to compression calculator: http://rosspistons.com/calculator.php

link to wiseco website: http://www.wiseco.com/PDFcatalogs/AB05_chevy.pdf its on page 8 of 12

Link to pistons on summits website: http://store.summitracing.com/defaul...=egnsearch.asp youll have to type in the part number. the prefix is wis-part#

link to eric at HPE: https://www.horsepowerengineering.co...contact_us.php

is there anyother information youd like?
if so post up.
ed
firebird455@gmail.com

ddnspider

iTrader: (26)

ditto...Eric is really taking care of me over there.He gave me and EdblownVert a killer deal on our 383 package.Hey ed got any flow #'s for those heads???

69firebird

iTrader: (14)

my heads? they are 312 at 600

im hoping that between the motor, heads, intake, and about 18psi
id love to get 700-800

ddnspider

iTrader: (26)

thatd be huge if you can manage that....you trying to do that on pump gas or race gas?

69firebird

iTrader: (14)

I intend to see how much I can get on pump, and then add alky.

Im not going to run race gas, dont want the expense.
Im going to make a dual nossle alky kit if I end up needing something more.

Itd be nice to make say 600 on pump only.

Im just hoping for 700-800 honestly i wont care what it makes, as long as its over 500
cause after that its just tunning. I think i have the hard parts, its just a matter of getting the tune right after that. Fastech is local so im going to let them do it and see what they can do.
Going to have to hook up the T-Com, and once its been running a while ill add the megasquirt and turbo to it
ed

ddnspider

iTrader: (26)

gotcha....yeah about the only semi local place for me is over in Orlando at Next Level Performance,which Mike Norris does a very good job so it should work out.Im basically having the same feelings as you as far as power....anything over 500rwhp is enough to walk all over 99.9% of street cars...and our cars will be nice and quiet to boot!What cam specs did you go with?

1a-play

iTrader: (9)

thanks for the info Ed- I'm keeping the kit- just having a bad day- it's running now and I'm glad I stuck it out- I have some TEA 5.3 also - just wondering away to use them. I just need a tune and a meth inj- I'm glad I wrapped all the pipes- helped with the heat- can't waite to use the transbrake!!!

1a-play

iTrader: (9)

Ed, summit says it a 2.2 dish- did you use stock rods or rods of 6.100 length?

69firebird

iTrader: (14)

its not a 2.2 its a 25cc dish

1a-play

iTrader: (9)

I guess summits page is messed up - does it fit a 6.100 or 6.125 rod?

69firebird

iTrader: (14)

6.125 if I remember correctly

69firebird

iTrader: (14)

Honestly,
Id call eric at HPE, he matched Summits pricing for me, and if you getting rods as well, id definatly call him, as he has some compstars that are a great peice and a great price.
ed

1a-play

iTrader: (9)

did you use the compstars? I've called HPE a couple of times but got put on hold and got hung up on so I'm probably not going to try again

69firebird

iTrader: (14)

oh,
Send him an e-mail, thats prolly the best way to get ahold of him

I want to say the addy is like eric@horsepowerengineering.com

while I was dealing with him, I saw the counter and back and fourth we had about 112 e-mails. He ALWAYS replied try that way, when I was there inperson, the counter help looked kinda like some punkish people

Yes I have the compstars, wiseco pistons, and some total seal rings eric spec'd. as well as a cam he speced for me
ed

1a-play

iTrader: (9)

I think all the compstars are 6.125 for LS1's