started my Install
Thread Starter
Joined: Sep 2004
Posts: 717
Likes: 0
From: Fairview NC (near Charlotte)
started my PTK LS1 Turbo Install I am installing the PTK kit right now
the design on this kit and the fit is really nice considering what they had to work with
who ever complains about what you pay for a nice kit for a LS1 car that goes over the K-Member has not really looked at what they had to work with
when you look at the kit and start the install you will think "there aint no way this will fit" but it does with a little " less than 1/2 inch" to spare
I am running a Stock engine for now with a precision T-67 and air to air
going to finish the install by monday night I hope and should have dyno results by the end of the week I hope
keep in mind that All I am running is 7 Pounds of boost for now so the numbers will not be really high
the design on this kit and the fit is really nice considering what they had to work with
who ever complains about what you pay for a nice kit for a LS1 car that goes over the K-Member has not really looked at what they had to work with
when you look at the kit and start the install you will think "there aint no way this will fit" but it does with a little " less than 1/2 inch" to spare
I am running a Stock engine for now with a precision T-67 and air to air
going to finish the install by monday night I hope and should have dyno results by the end of the week I hope
keep in mind that All I am running is 7 Pounds of boost for now so the numbers will not be really high
Last edited by Darren P; Sep 4, 2005 at 10:19 PM.
Thread Starter
Joined: Sep 2004
Posts: 717
Likes: 0
From: Fairview NC (near Charlotte)
Originally Posted by CAT3
So sweet, been waiting year for someone to install this kit. Good luck and PLEASE take plenty of pics along your way!
will take more today
Originally Posted by Darren P
I am installing the PTK kit right now
the design on this kit and the fit is really nice considering what they had to work with
who ever complains about what you pay for a nice kit for a LS1 car that goes over the K-Member has not really looked at what they had to work with
when you look at the kit and start the install you will think "there aint no way this will fit" but it does with a little " less than 1/2 inch" to spare
I am running a Stock engine for now with a precision T-67 and air to air
going to finish the install by monday night I hope and should have dyno results by the end of the week I hope
keep in mind that All I am running is 7 Pounds of boost for now so the numbers will not be really high
the design on this kit and the fit is really nice considering what they had to work with
who ever complains about what you pay for a nice kit for a LS1 car that goes over the K-Member has not really looked at what they had to work with
when you look at the kit and start the install you will think "there aint no way this will fit" but it does with a little " less than 1/2 inch" to spare
I am running a Stock engine for now with a precision T-67 and air to air
going to finish the install by monday night I hope and should have dyno results by the end of the week I hope
keep in mind that All I am running is 7 Pounds of boost for now so the numbers will not be really high
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
Joined: Sep 2004
Posts: 717
Likes: 0
From: Fairview NC (near Charlotte)
Originally Posted by bboyferal
Good Stuff! 
Much appreciated!
Much appreciated!
JK
but when you get ready to do your install let me know and I will give you some really good info
also for anyone else here who is doing one because It does not have instructions and they will tell you "it is just like a set of hedders" BULL ****
but it does go together and everything fits but expect to take 5 or so good days to do it and you really need a lift if you have access to one
but all Smartass commets aside it is a great kit but it could really use some instructions
Originally Posted by Darren P
HA HA when you start to do your install I will sell you the Photos for about $1000.00 or so and after a week or so you would be glad to pay me that for them
JK
but when you get ready to do your install let me know and I will give you some really good info
also for anyone else here who is doing one because It does not have instructions and they will tell you "it is just like a set of hedders" BULL ****
but it does go together and everything fits but expect to take 5 or so good days to do it and you really need a lift if you have access to one
but all Smartass commets aside it is a great kit but it could really use some instructions
JK
but when you get ready to do your install let me know and I will give you some really good info
also for anyone else here who is doing one because It does not have instructions and they will tell you "it is just like a set of hedders" BULL ****
but it does go together and everything fits but expect to take 5 or so good days to do it and you really need a lift if you have access to one
but all Smartass commets aside it is a great kit but it could really use some instructions
Well, unless you have a lay-away plan, I don't think I can afford those pics after all the money I've been spending on odds and ends. 
I'm happy to hear about the quality. Sounds like a tight fit, huh! Have fun, bro!
Oh, and TTT for the pics!