My SS is finally finished.
Thread Starter
FormerVendor
Joined: Dec 2001
Posts: 2,444
Likes: 2
From: WWW.SPEEDINC.COM
My SS is finally finished. After 10 months, hundreds of hours of work and thousands of dollars invested, my SS is finally back on the road after a ground up rebuild.
It's the same basic combination, I just went through and restored the undercarriage, rebuilt the entire driveline, suspension, braking system, fuel system, and engine management.
http://www.ls1speed.com/intmd8.cfm
It's the same basic combination, I just went through and restored the undercarriage, rebuilt the entire driveline, suspension, braking system, fuel system, and engine management.
http://www.ls1speed.com/intmd8.cfm
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
congrats man thats the icing on the cake when you get to finish something like that with everything the way you want it.
you just cut the 3" off of the 20tl and enlarge to 3.5 or is it a different muffler?
will you bring it to the maryland ls1tech race on the 17th?
you just cut the 3" off of the 20tl and enlarge to 3.5 or is it a different muffler?
will you bring it to the maryland ls1tech race on the 17th?
Thread Starter
FormerVendor
Joined: Dec 2001
Posts: 2,444
Likes: 2
From: WWW.SPEEDINC.COM
Thanks guys.
Kurt- Whenever you like, though I hadn't really planned for any road trips to Michigan, I'm sure we'll run into each other somewhere
MM- The internal core of a 2OTL muffler is actually 3.5 that splits to dual 2.5. I just cut the 3in inlet out of the muffler (and internally where it met the 3.5 core), and welded a piece of 3.5in pipe to the core and muffler case.
Kurt- Whenever you like, though I hadn't really planned for any road trips to Michigan, I'm sure we'll run into each other somewhere
MM- The internal core of a 2OTL muffler is actually 3.5 that splits to dual 2.5. I just cut the 3in inlet out of the muffler (and internally where it met the 3.5 core), and welded a piece of 3.5in pipe to the core and muffler case.
That is the nicest f-body I have ever seen! Job well done my friend! 
