Are these dyno numbers good w/ vortech?
Thread Starter
Staging Lane
Joined: Feb 2002
Posts: 97
Likes: 0
From: Athens, Ga
Are these dyno numbers good w/ vortech? 98 6 spd ls1 SS
baseline stock with hooker headers(not longtube)
330whp, 349 ft-lbs
vortech g trim 5 psi no aftercooler
38lb injectors and borla
391.8 and 372 ft-lbs
Cars not mine, but might be soon, i was just curious if these numbers sounded right for this set-up. Boost barely hits 5 psi at 5800 or so. Just curious, i'm still in the early learning stages. Thanks --DJ
baseline stock with hooker headers(not longtube)
330whp, 349 ft-lbs
vortech g trim 5 psi no aftercooler
38lb injectors and borla
391.8 and 372 ft-lbs
Cars not mine, but might be soon, i was just curious if these numbers sounded right for this set-up. Boost barely hits 5 psi at 5800 or so. Just curious, i'm still in the early learning stages. Thanks --DJ
TECH Addict
Joined: Nov 2001
Posts: 2,659
Likes: 1
From: Bellevue, Wa
Re: Are these dyno numbers good w/ vortech? sounds right on.
mine with 30# injectors, stock manifolds and supertrapps instead of the stock muffler went 384/385 just hitting 5psi as well. This is with a powerdyne.
mine with 30# injectors, stock manifolds and supertrapps instead of the stock muffler went 384/385 just hitting 5psi as well. This is with a powerdyne.
