ALKY INJECTION ON A VORTECH SUPERCHARGER
Re: ALKY INJECTION ON A VORTECH SUPERCHARGER go to turbobuick.com they have a section dedicated to nitrous/alky. You'll run it after you see me do it!! <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
TECH Apprentice
Joined: Nov 2001
Posts: 356
Likes: 0
From: Bellingham, WA
Re: ALKY INJECTION ON A VORTECH SUPERCHARGER From what i am told the stuff works great.
SMC ALCHY INJECTION
The SMC kit is what most of the buick guys run and i was going to run but dont have the need for myself now.
Steven
SMC ALCHY INJECTION
The SMC kit is what most of the buick guys run and i was going to run but dont have the need for myself now.
Steven
TECH Resident
iTrader: (3)
Joined: Nov 2001
Posts: 979
Likes: 0
From: Richmond, VA Where fast cars, well......are hard to come by.
Re: ALKY INJECTION ON A VORTECH SUPERCHARGER Sure that's the right link? <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Thread Starter
11 Second Truck Club
Joined: Nov 2001
Posts: 768
Likes: 0
From: scottsboro, al
Re: ALKY INJECTION ON A VORTECH SUPERCHARGER </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Blackbird:
<strong>I'm doing it with my Powerdyne.
Works great.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">where did you put the bottle under hood or in rear. How much could you raise your timing or just so you wouldn't have to run race gas.
<strong>I'm doing it with my Powerdyne.
Works great.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">where did you put the bottle under hood or in rear. How much could you raise your timing or just so you wouldn't have to run race gas.
TECH Addict
Joined: Nov 2001
Posts: 2,659
Likes: 1
From: Bellevue, Wa
Re: ALKY INJECTION ON A VORTECH SUPERCHARGER I'm using a 5 gallon fuel cell in the back.
I was able to move from 16 degrees timing to 24 using 91 octane. This is with 6psi of boost.
Here are some not so great pics of my homemade setup.
http://heath.abbate.org/Firebird/images/h20alky
please note the entire setup wire and all is looking much better now <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I was able to move from 16 degrees timing to 24 using 91 octane. This is with 6psi of boost.
Here are some not so great pics of my homemade setup.
http://heath.abbate.org/Firebird/images/h20alky
please note the entire setup wire and all is looking much better now <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
