YS-Trim 9.49 @ 144mph, 14psi
#1
YS-Trim 9.49 @ 144mph, 14psi
Sorry for the slight tease, since it's an LT4.
LT4 383 on the cover of GMHTP this Month, May Issue.
Stroked, Forged JE, odd 10:1 CR.
3.90 gears. 14psi with belt slippage issues above that. Ran a 9.49 with the slippage.
Went cogged to see his full 26psi design and expects to be in the 8's shortly due to the cog. Could be the fastest street LT1 out there.
LT4 383 on the cover of GMHTP this Month, May Issue.
Stroked, Forged JE, odd 10:1 CR.
3.90 gears. 14psi with belt slippage issues above that. Ran a 9.49 with the slippage.
Went cogged to see his full 26psi design and expects to be in the 8's shortly due to the cog. Could be the fastest street LT1 out there.
#2
Re: YS-Trim 9.49 @ 144mph, 14psi
He has occasionally cruised the car and driven it on the street to do some work on his FAST pcm tuning.
He is a local friend and is building my air/water intercooler for my car.
His car went 9.49 on that pass but the 1/8th MPH was 118mph which means the car would have went 9.1/9.2's if it had not held belt slippage.
He is a local friend and is building my air/water intercooler for my car.
His car went 9.49 on that pass but the 1/8th MPH was 118mph which means the car would have went 9.1/9.2's if it had not held belt slippage.
#3
Re: YS-Trim 9.49 @ 144mph, 14psi
yes it is one of my favorite Lt1 cars out there. Some day my white Z will be very close to his setup only with a 18 degree 434 Gen 1 small block on the gun. The car is one of the most intimidating 4th gens ive seen from the rear.
#6
Re: YS-Trim 9.49 @ 144mph, 14psi
ya that is chris sikora's car. He post on here as INURDREMZ or something close to that. I saw that car at the MFBA track rental in October. The Car is Beautiful. To bad i didnt get to see it run(he had fuel pump issues).