Question about turbotech intercooler
Thread Starter
On The Tree
Joined: Dec 2001
Posts: 167
Likes: 0
From: FFX, VA
Question about turbotech intercooler Does anyone have any insight on the capabilities of it? It looks kinda small which is why I ask. Does Turbotech manufacture them themselves or are they purchased from anther source?
Launching!
Joined: Jan 2002
Posts: 299
Likes: 41
From: Detroit, Murder City
Re: Question about turbotech intercooler It's actually a Spearco (Turbonetics) core with Turbo Tech's endtanks welded on. We typically see within about 15 degrees of ambient temp on the street, even under 10+psi of boost. I wouldn't worry about replacing this intercooler until you're making enough power to require a SERIOUS fuel system to go with it that includes parts from Aeromotive or Weldon.
Thread Starter
On The Tree
Joined: Dec 2001
Posts: 167
Likes: 0
From: FFX, VA
Re: Question about turbotech intercooler Actually I plan on a built block shooting for around 600-650rwhp. I already have plans on upgrading the fuel system. Do you think it will be alright with this power on a daily driver?
<small>[ March 11, 2003, 07:32 PM: Message edited by: Blkknight ]</small>
<small>[ March 11, 2003, 07:32 PM: Message edited by: Blkknight ]</small>
Re: Question about turbotech intercooler Im about a hundred HP from there, it does ok. Does fine as a daily driver.
I migt upgrade the intercooler when i get closer to the 650-700rwhp range.
I migt upgrade the intercooler when i get closer to the 650-700rwhp range.
