Predictions for HP on new setup...

Reply Subscribe

Thread Tools

Search this Thread

Dec 16, 2005 | 06:54 AM

onefastss223

Thread Starter

On The Tree

iTrader: (14)

Joined: Jul 2005

Posts: 181

Likes: 0

Predictions for HP on new setup...

Alright guys, here it is.
-347 LS1
-Weisco Pistons
-polished crank
-222/230 .574/.580 114 + 4LSA(CamMotion)
-Patriot 6.0L Stage II heads(72cc, 2.02/1.57)
-ATI P1-SC with 7" crank and 3.5" blower pulley(6-rib)
-Alky Control Methanol Kit
-M6(if you wanted to know)
-CR around 9.4-9.5ish
On the old setup, I had MTI stage 2E 5.7L heads, and the MTI C1 hammerCam(222/222, not sure on lift, 112lsa). I also had the 4.1" blower pulley. At 7lbs it put down 550rwhp/499rwtq with no methanol.

CAR SHOULD BE BACK TOGETHER NEXT WEEK...

What do you guys think I should put down with the new heads/cam/meth/pulley? I'm thinking 600-630 or so.

Any input is welcome...

Dec 16, 2005 | 02:24 PM

ddnspider

10 Second Club

iTrader: (26)

Joined: Aug 2004

Posts: 14,628

Likes: 1,778

From: FL

depending on how much boost id imagine 600-625ish with meth like you said.

Dec 16, 2005 | 02:28 PM

Phil99vette

7 Second Club

iTrader: (11)

Joined: Jul 2002

Posts: 8,758

Likes: 9

From: Port Tobacco, MD

A H & C P1SC corvette just went 70x over on corvetteforum.com.
Phil

Dec 16, 2005 | 02:36 PM

ddnspider

10 Second Club

iTrader: (26)

Joined: Aug 2004

Posts: 14,628

Likes: 1,778

From: FL

Quote:

Originally Posted by Phil99vette

A H & C P1SC corvette just went 70x over on corvetteforum.com.
Phil

At how many #'s?most get maxed out about 600 or so.

Dec 16, 2005 | 03:35 PM

Phil99vette

7 Second Club

iTrader: (11)

Joined: Jul 2002

Posts: 8,758

Likes: 9

From: Port Tobacco, MD

http://www.z06vette.com/gallery/data...Dec_05_SAE.JPG

Dec 16, 2005 | 04:08 PM

ddnspider

10 Second Club

iTrader: (26)

Joined: Aug 2004

Posts: 14,628

Likes: 1,778

From: FL

i wasnt doubting you,i asked how many psi that was at?

Dec 16, 2005 | 04:12 PM

Pro Stock John

LS1Tech Co-Founder

iTrader: (34)

Joined: Nov 2001

Posts: 45,369

Likes: 1,803

From: Chicago, IL

Depending on how much boost you can make with those pulleys, I'd say 600-650rwhp.

10 Reasons Daily Driving a Swap Project SUCKS! (& 1 Reason to Do It Anyway)

Michael S. Palmer

6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Brett Foote

Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Pouria Savadkouei

Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Verdad Gallardo

7 Most Reliable High-Performance Engines GM Has Ever Built

Verdad Gallardo

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Verdad Gallardo

6 Common C5 Corvette Failures and What's Involved In Repairing Them

Pouria Savadkouei

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Verdad Gallardo

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Pouria Savadkouei

Top 10 Most Powerful Chevy Trucks Ever Made!

Dec 16, 2005 | 06:15 PM

ddnspider

10 Second Club

iTrader: (26)

Joined: Aug 2004

Posts: 14,628

Likes: 1,778

From: FL

Quote:

Originally Posted by Phil99vette

Its all good, I just wanted to post the thread and dyno graph, pics are always worth 1000 words.
Phil

true that....gotta love torque at a 45* angle!

Dec 17, 2005 | 05:03 AM

#10

onefastss223

Thread Starter

On The Tree

iTrader: (14)

Joined: Jul 2005

Posts: 181

Likes: 0

Thanks for the input guys....I'm optimistic that I'll see something closer to 650 but dont want to get my hopes up. As long as it runs like a bat out of hell I'll be more than happy...