572ci twin turbo dyno pull....
Thread Starter
Teching In
Joined: Feb 2006
Posts: 45
Likes: 0
572ci twin turbo dyno pull.... i know it's not LS1 but i thought you might be interested....
just one of the dyno pulls we made that day,bearing in mind that it could only be recorded at 6200 because the dyno was being overloaded.
Video is courtesy of Steve Sczepanski of Mechanical Power Systems in Toronto,Canada www.mpsys.ca The guy wired the car and wired the electrics and tuned the motor on the dyno...he's seriously talented...btw,that's me at the back working the dyno boost valve and looking pensive....
http://videos.streetfire.net/search/...9D7B4B25A9.htm
just one of the dyno pulls we made that day,bearing in mind that it could only be recorded at 6200 because the dyno was being overloaded.
Video is courtesy of Steve Sczepanski of Mechanical Power Systems in Toronto,Canada www.mpsys.ca The guy wired the car and wired the electrics and tuned the motor on the dyno...he's seriously talented...btw,that's me at the back working the dyno boost valve and looking pensive....
http://videos.streetfire.net/search/...9D7B4B25A9.htm
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Resident
Joined: Oct 2005
Posts: 787
Likes: 0
Only a canadian would be standing there during a pull. I get scared when I run back behind there to adjust the valve or turn on the boost valve with the engine idling. That canadian mist is good stuff huh? The best part of that video is the look on your face when the flame shot out from decel.
Thread Starter
Teching In
Joined: Feb 2006
Posts: 45
Likes: 0
it made 1600hp at that point which was about 1000rpm past it's peak. It was realy choking itself at that point which led us to get a Jay Allen cam and for Holset to send us bigger ex housings. estimations are 1900 to 2000 hp at 5000rpm.As i said the 2000hp dyno couldn't actually hold it at anything under 6200rpm......
Thread Starter
Teching In
Joined: Feb 2006
Posts: 45
Likes: 0
Originally Posted by andereck
Only a canadian would be standing there during a pull. I get scared when I run back behind there to adjust the valve or turn on the boost valve with the engine idling. That canadian mist is good stuff huh? The best part of that video is the look on your face when the flame shot out from decel.
Teching In
Joined: Sep 2004
Posts: 36
Likes: 0
2000hp at 5000rpm on 93 octane - if that is not a record - it'd be close to one.
I'd love to see pictures of the beast and turbo system and specs. You do not make that power by just throwing something together - well done!
I'd love to see pictures of the beast and turbo system and specs. You do not make that power by just throwing something together - well done!
On The Tree
Joined: Feb 2005
Posts: 137
Likes: 0
From: DFW, Texas
Electromotive Tec 3R installed & Tuned by Steve @ MPS for Andy Frost's Street Legal Big Block Chevy with Twin 88mm Turbo's - 2000 hp Dyno was not able to hold the torque from this engine.
Thread Starter
Teching In
Joined: Feb 2006
Posts: 45
Likes: 0
ok,a couple of pics pre dyno......more when i get the camera working next week when it should be ready to go....
top ones are latest...intercooler is slightly different.We had to make the top thicker and the outlet less restrictive....
this is the car......
top ones are latest...intercooler is slightly different.We had to make the top thicker and the outlet less restrictive....
this is the car......
