turbo to big for the 4.3L?
06-01-2006, 05:25 PM
#1
TECH Fanatic
Thread Starter
iTrader: (4)
Join Date: Nov 2005
Posts: 1,078
Likes: 0
Received 0 Likes
on
0 Posts
turbo to big for the 4.3L? hey guys im picking up a Garret turbo off of a 7.3L ford this saturday for $50- no shaft play, impeller spins like its new.
my only problems are that it is internally gated and im afraid its to big. since its a garret though they should sell a smaller housing and that is externally wastegated correct?
my only problems are that it is internally gated and im afraid its to big. since its a garret though they should sell a smaller housing and that is externally wastegated correct?
06-01-2006, 06:53 PM
#4
10 Second Club
iTrader: (6)
Join Date: May 2006
Location: Maryland
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
I have a t76 q trim on my 4.3 thats in the truck now (see sig). it spools a little slow even with the 3500 stall and thats a built motor with very good flowing heads. I bought the turbo though with future plans in mind. If your seriously looking at turboing your 4.3 go to www.syty.net since all syclones / typhoons were 4.3 turbo from the factory.
