Victor Jr.
gotme thats the whole discusion of why the daves is popular due to u dont have to cut nothing,but i think its expensive because it bring fuel rail spacers im not sure but im going with intakeselbows,i dont mind cutting an 1 or 2 to save 200 bucks.
its expensive cause its custom. If you don't mind hacking your cowl up, go for it.
one day I might turn the car back to stock (that'll be a very long time from now) and I just couldn't cut my car up for an intake elbow.
if you're spending 1500 bucks what's another 200? lol
isn't there another manifold we can use that isn't as high as the victor jr?
one day I might turn the car back to stock (that'll be a very long time from now) and I just couldn't cut my car up for an intake elbow.
if you're spending 1500 bucks what's another 200? lol
isn't there another manifold we can use that isn't as high as the victor jr?
Originally Posted by CAT3
Here you guys go... Low Profile Elbow from Nitrous Daves...
https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html
https://ls1tech.com/forums/nitrous-oxide/404043-nitrous-outlet-ls1-intake-system.html
Not sure what price you were looking at, but Nitrous Daves price includes the internal spray bar setup with fittings, so might be a little less since ya hairdryer guys dont need the nitrous 
Originally Posted by CAT3
Not sure what price you were looking at, but Nitrous Daves price includes the internal spray bar setup with fittings, so might be a little less since ya hairdryer guys dont need the nitrous
Originally Posted by CAT3
Not sure what price you were looking at, but Nitrous Daves price includes the internal spray bar setup with fittings, so might be a little less since ya hairdryer guys dont need the nitrous
Originally Posted by Nitro Dave's Nitrous Outlet
Ok Guys Here it is..
We started with this.
Then we picked the intake. Its a Edelbrock Victor JR.
So then we made a elbow that cleared your cowl and hood so that there was no cutting up your car.
These units are all custom Built when ordered.Here are the only options we will offer..
Complete-1,895.50
W/O throttle body-1520.50
You can buy the elbow alone for 375.00
You can have the unit custom Anodized any color for a 100.00
Thank you guys for all the patience and interest you have put forward to this build so far.
We are now selling these units.
Dave
We started with this.
Then we picked the intake. Its a Edelbrock Victor JR.
So then we made a elbow that cleared your cowl and hood so that there was no cutting up your car.
These units are all custom Built when ordered.Here are the only options we will offer..
Complete-1,895.50
W/O throttle body-1520.50
You can buy the elbow alone for 375.00
You can have the unit custom Anodized any color for a 100.00
Thank you guys for all the patience and interest you have put forward to this build so far.
We are now selling these units.
Dave
Are you saying that the elbow has the spray bars built in and that when he is refering to elbow alone that includes the spray bars?
Not the elbow... I was referring to a post saying the Intake elbow was $200 cheaper, when looking at spenging $1500 whats another $200...so I thought the conversation was in reference to the whole setup because the setup is $1800 or whatever, but that includes the internal spray bars. If all you need is the elbow, and you can handle cutting the car the elbows.com one works great, if you dont wanna cut then Nitrous Daves is the answer. Sorry for the confusion.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
