Need Help with MSD... FI related.
That would be really helpful if you did but there's been well over 400 views on that particular thread...The MSD forum isn't that big so you think that the attention would warrant some of their time to at least look into the problem...
BOSS APPROVED! I just asked for updates on the MSD website. Does anybody have anything to report?
http://www.msdignition.com/forum/showthread.php?t=5909
http://www.msdignition.com/forum/showthread.php?t=5909
Originally Posted by msdtech4
Right now there are no updates on this. I do not foresee a programming change to the unit to change the graphs etc. The map programming is the same on all of our programmable units which is why this and the LS2 controller as well as 4.6 controller utilize the same set up. Functionally the unit will do what you are requesting and the dials at the bottom of the screen show the total values of retard, boost and rpm for observation. As mentioned before this does do what you want it to and works equally well on boosted, nitrous or normally aspirated applications. The changes are a little more involved as you have to change from one screen to the next but unfortunately that is how it is set up right now. I would recommend checking the software version periodically and look at the 6010, 6011 or 6012 software and see if there have been any updates.
Thanks,
MSD tech4
Thanks,
MSD tech4
And the answer to this is above...
