Need help with identifying TTi kit
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
Need help with identifying TTi kit I just got a TTi street T76 kit, or that is what it is supposed to be. Found some things I don't think are right. Would like to get some other opinions/answers from guys with the kit(RyanK, Stoleit I know of).
-the crossover is 2" diameter and one piece
-the downpipe directly off the turbo is 2.5" diameter
See pics for more details.
Hoses/clamps etc.
Godzilla BOV
Crossover
Crossover diameter
Turbo
DP and log (note DP touches log)
log primary diameter
downpipe
downpipe diameter directly off turbo
downpipe diameter at back of the pipe
-the crossover is 2" diameter and one piece
-the downpipe directly off the turbo is 2.5" diameter
See pics for more details.
Hoses/clamps etc.
Godzilla BOV
Crossover
Crossover diameter
Turbo
DP and log (note DP touches log)
log primary diameter
downpipe
downpipe diameter directly off turbo
downpipe diameter at back of the pipe
Last edited by bowtieman81; Jul 23, 2006 at 06:11 PM.
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
RyanK informed me that TTi measured the log diameters based on OD, not ID. So, the log primaries measure 1 7/8" OD, which I am guessing is close enough to 2".
Crossover is definitely the older 2.25" design, and the DP is definitely 2.5", not 3.
Crossover is definitely the older 2.25" design, and the DP is definitely 2.5", not 3.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Man you got a complete kit for $3100 shipped. -With upgraded parts! and even the ceramic coated 6.0 liter manifold.
I know about this deal and he (Matt) really bent over backwards giving you tons of photos before and answering tons of pms. He could've sold that kit 10 times over, but you were the 1st to respond.
Hell the turbo itself is $1700.
I hope you're not jumping on Matt, because he's a stand up guy in my book. ~Joshua
I know about this deal and he (Matt) really bent over backwards giving you tons of photos before and answering tons of pms. He could've sold that kit 10 times over, but you were the 1st to respond.
Hell the turbo itself is $1700.
I hope you're not jumping on Matt, because he's a stand up guy in my book. ~Joshua
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
Not jumping on Matt; he was good to deal with and helped a lot. In fact you will notice I never mentioned where I got the kit or who it came from.
However, the kit is not the complete and current T76 kit, which is what was advertised. I do think I should get the stuff that was described in the ad. The ad specifically said the kit had a 3" downpipe and that everything was included. I spoke with TTi and sent pics to them, Bob said that was not their downpipe
I also don't think I got the vacuum/PCV lines, oil line or the power steering lines. I will verify when I get home.
However, the kit is not the complete and current T76 kit, which is what was advertised. I do think I should get the stuff that was described in the ad. The ad specifically said the kit had a 3" downpipe and that everything was included. I spoke with TTi and sent pics to them, Bob said that was not their downpipe
I also don't think I got the vacuum/PCV lines, oil line or the power steering lines. I will verify when I get home.
Last edited by bowtieman81; Jul 19, 2006 at 01:48 PM.
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
I believe he gave me what was on his car, and I am not saying anybody tried to shaft me.
I do think a couple items need explained:
-why is the DP I got different than StoleIt's, and why is it not 3" diameter? Matt said he put a cutout on the car; I would guess the downpipe was changed to accomadate the cutout. It is clear that somebody welded that flange on the DP.
-why is the crossover the older, smaller design?
I do think a couple items need explained:
-why is the DP I got different than StoleIt's, and why is it not 3" diameter? Matt said he put a cutout on the car; I would guess the downpipe was changed to accomadate the cutout. It is clear that somebody welded that flange on the DP.
-why is the crossover the older, smaller design?
Thread Starter
TECH Fanatic
iTrader: (35)
Joined: Sep 2004
Posts: 1,660
Likes: 0
From: Maryland/Illinois
Originally Posted by RealQuick
Perhaps he though it was a TTi kit he was selling, but maybe it was a Q_M_P kit? They are similar right?
Well TTi sells their parts individually, so if you want a new DP just order it from them. If you want an auto cross over I got one laying around I'll get rid of, but it wont work with an T56. But if you want to go TH400 or 4L60E it would fit like a glove! It took them about 2 weeks to get me the new cross over for my kit.