4L60e behind a turbo motor???
Thread Starter
TECH Apprentice
iTrader: (8)
Joined: Nov 2005
Posts: 311
Likes: 0
From: Colorado Springs
4L60e behind a turbo motor??? Is anyone running a 4L60e behind their turbo car?
Even though I'm gonna be pushing sort of big HP numbers (650rw) I'm not building a drag car anymore. I'm going for the pro-touring effect with my 67 Chevelle. I almost want to go with a 5 or 6 speed manual trans but the cost is a big factor. I have a good 4L60 that was originally behind the stock LS1 I have. Would this hold up if I did a rebuild and upgraded a few parts?
It may occasionally see some good blasts but for sure not all the time. Mainly gonna be a driver for car shows, cruises and family outings
thanks
Even though I'm gonna be pushing sort of big HP numbers (650rw) I'm not building a drag car anymore. I'm going for the pro-touring effect with my 67 Chevelle. I almost want to go with a 5 or 6 speed manual trans but the cost is a big factor. I have a good 4L60 that was originally behind the stock LS1 I have. Would this hold up if I did a rebuild and upgraded a few parts?
It may occasionally see some good blasts but for sure not all the time. Mainly gonna be a driver for car shows, cruises and family outings
thanks
Thread Starter
TECH Apprentice
iTrader: (8)
Joined: Nov 2005
Posts: 311
Likes: 0
From: Colorado Springs
Yeah, but I don't happen to have an 80 
I have a nice built TH400 but I want some sort of overdrive '
Who built yours and what was the damage? You can PM me if ya like
I have a nice built TH400 but I want some sort of overdrive '
Who built yours and what was the damage? You can PM me if ya like
Do a search over at CF and see how many of those boosted guys are successfully running RPM 4L60E's. Rodney at RPM has had great success with his 4L60E's.
If your not going to be beating on it all the time I bet the right builder can get the 60E to live in your car.
If your not going to be beating on it all the time I bet the right builder can get the 60E to live in your car.
Originally Posted by King James
Do a search over at CF and see how many of those boosted guys are successfully running RPM 4L60E's. Rodney at RPM has had great success with his 4L60E's.
If your not going to be beating on it all the time I bet the right builder can get the 60E to live in your car.
If your not going to be beating on it all the time I bet the right builder can get the 60E to live in your car.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Ya good luck finding a 80 for sale. I used alot of my connections to get a core for under $700. The problem is that there is the $750 core charge on top of the 1500+ you spend on the tranny alone. Lucky I found one with a manual valve body installed and I will manually lock it up with a push button mounted to my console and the B&M shifter. Good luck.
Im in the same boat. Looking to make 500-600 rwhp and already have a 60E. I am going to upgrade the 3-4 clutches, beast reaction shell and run it for a while until it blows. In the meantime, save some coin for a 80E and convertor. You can find used 80E's on car-part.com for around 700 with low mileage. Then all you would have to do is put in a shift kit and go.
You can spend the money on a built 4l60e with a warranty and spend your life changing out trannies every 2 months or do it right the first time and buy an 80. Its a lot less hassle going with the 80!
My friend Dave aka Caveman on here has a Century built tranny 4l60e and that sucker has lasted and he was running that car every week. his blower engine was making 650 rear wheel and it was holding up just fine.
Candlebandit had a Rock-On 4L60E...... then his converter turned loose and took out the tranny with it (on his 130th 10.XX pass down the track). God only knows how many street miles he had on it. Honestly, I think you would be fine with a nicely built 4L60E.
Originally Posted by Zombie
Why not use the th400 and some nice 2.7x gears?
Thread Starter
TECH Apprentice
iTrader: (8)
Joined: Nov 2005
Posts: 311
Likes: 0
From: Colorado Springs
I could I guess since I have a sweet TH400 already. My rear is a 12 bolt w/4.10 posi right now. It would be easier to swap gears and carrier. 3.08 is the lowest I can go in the 12 bolt. RPM's at 65 would be 2450 w/28" tire and 2300 w/30" tire