What size stall should i get or need?
Thread Starter
9 Second Club
iTrader: (9)
Joined: Jan 2004
Posts: 1,107
Likes: 14
From: Edinburg, Tx
What size stall should i get or need? I'm in the works of finishing my turbo set up,waswonduring how much of a
stall is need it for a turbo application and what u turbo guyes are running with your set ups. here is a little run down of what i got going.
370 built by LME 8.5:1 CR
ETP 245 Heads 72cc
Vr Jr intake port patched to the heads
Crower adj. shaft mounted rockers
ARP 1/2" head studs
Billet main caps
Reciver grooved and O ringed
In house custom upper intake below
90mm NW Tb
96# Injectors
TNT F-1 kit 75shot maybe 100shot to keep things nice and cool
Custom Cam 235 234 597 599 116
Th350 w/ transebrake
No converter yet
Moser 12 bolt 33 spline 3.42
S88 Turbo
48mm turbo smart wastgate
50mm bov
High density liquid to air intercooler
stall is need it for a turbo application and what u turbo guyes are running with your set ups. here is a little run down of what i got going.
370 built by LME 8.5:1 CR
ETP 245 Heads 72cc
Vr Jr intake port patched to the heads
Crower adj. shaft mounted rockers
ARP 1/2" head studs
Billet main caps
Reciver grooved and O ringed
In house custom upper intake below
90mm NW Tb
96# Injectors
TNT F-1 kit 75shot maybe 100shot to keep things nice and cool
Custom Cam 235 234 597 599 116
Th350 w/ transebrake
No converter yet
Moser 12 bolt 33 spline 3.42
S88 Turbo
48mm turbo smart wastgate
50mm bov
High density liquid to air intercooler
Originally Posted by ls1CANTU
I'm in the works of finishing my turbo set up,waswonduring how much of a
stall is need it for a turbo application and what u turbo guyes are running with your set ups. here is a little run down of what i got going.
370 built by LME 8.5:1 CR
ETP 245 Heads 72cc
Vr Jr intake port patched to the heads
Crower adj. shaft mounted rockers
ARP 1/2" head studs
Billet main caps
Reciver grooved and O ringed
In house custom upper intake below
90mm NW Tb
96# Injectors
TNT F-1 kit 75shot maybe 100shot to keep things nice and cool
Custom Cam 235 234 597 599 116
Th350 w/ transebrake
No converter yet
Moser 12 bolt 33 spline 3.42
S88 Turbo
48mm turbo smart wastgate
50mm bov
High density liquid to air intercooler
stall is need it for a turbo application and what u turbo guyes are running with your set ups. here is a little run down of what i got going.
370 built by LME 8.5:1 CR
ETP 245 Heads 72cc
Vr Jr intake port patched to the heads
Crower adj. shaft mounted rockers
ARP 1/2" head studs
Billet main caps
Reciver grooved and O ringed
In house custom upper intake below
90mm NW Tb
96# Injectors
TNT F-1 kit 75shot maybe 100shot to keep things nice and cool
Custom Cam 235 234 597 599 116
Th350 w/ transebrake
No converter yet
Moser 12 bolt 33 spline 3.42
S88 Turbo
48mm turbo smart wastgate
50mm bov
High density liquid to air intercooler
Sup man..... with all that just do what we did with my car and give Chance Converters a call..... be ready though there not cheap but they know exactly what there doing...
Kyle
