old man cam or cheatr cam for STS?
Thread Starter
Joined: Dec 2005
Posts: 1,392
Likes: 0
From: Central California
old man cam or cheatr cam for STS? well it is almost impossible to find a 02+ z06 cam for my sts setup, as i have been unsuccessful for 2 weeks in finding one. i have been looking at other cams instead that dont require much tuning and would work good with the STS, and i have found two possibilities on thunder racing's website, so which would y'all recommend?
"old man" cam : 214/220 .600/.523 115 LSA
cheatr cam: 214/230 .601/.578 117 LSA
very similar, but which would be better if any?
"old man" cam : 214/220 .600/.523 115 LSA
cheatr cam: 214/230 .601/.578 117 LSA
very similar, but which would be better if any?
Scoggin D. has LS6 cms if thats what you want
Why so much lift (.600)? What other mods do you have? If you are wanting to use one of Thunders cams, I would lean more towards something like their 224/227 .563 .569 114. JMO though.
Why so much lift (.600)? What other mods do you have? If you are wanting to use one of Thunders cams, I would lean more towards something like their 224/227 .563 .569 114. JMO though.
Thread Starter
Joined: Dec 2005
Posts: 1,392
Likes: 0
From: Central California
well does the lift make a big difference? i got your patriot springs and chromoly pushrods if thats what you mean. i really need a cam, like this week, because i need to get my car into my mechanic before school starts. i havent been successful in finding an ls6 cam, as they are all on backorder. i was just looking at thunder's website, and thought these cams would work with boost? but i wasnt sure. i just want a cam that will run with stock tuning so i can still drive it until i can order my sts kit.
i went with a lingenfelter 207/230 cam on a 121LSA, good turbo cam, stock idle. but i dont know how much tuning it requires. by the way ii know a place that still has brand new ls6s cams, pm and ill tell u where, its a secret, last time i checked with them they had 2 left.........
Originally Posted by 2002/Black/SS
i went with a lingenfelter 207/230 cam on a 121LSA, good turbo cam, stock idle. but i dont know how much tuning it requires. by the way ii know a place that still has brand new ls6s cams, pm and ill tell u where, its a secret, last time i checked with them they had 2 left.........
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Originally Posted by trtturbo
the GT-7 is on a 121. We installed that cam in Longrange4U's car. more than likely it will be coming out when we do the 408
Yeah, that cam is miniature in a 408ci engine. LOL I can only imagine what 207º intake duration would be like on a hog like that, run out of beans by 4500! =)
Originally Posted by trtturbo
the GT-7 is on a 121. We installed that cam in Longrange4U's car. more than likely it will be coming out when we do the 408
