First time to the track!
Thread Starter
6 Second Club Moderator
iTrader: (7)
Joined: Sep 2002
Posts: 3,682
Likes: 0
From: Lombard .IL
First time to the track! The first trip to the track with the turbos. The trans brake wasn't hooked up. So the first pass of the trailer with new tires.
I used the foot brake to bring the rpm up to 1500 to 1800 , I didn't want to roll through the lights. 60' 1.524 8th 5.916 @ 124.70 I let out of it so I could check a/f, breaking before the finish line. 9.413 @ 120.93.
I only got on more run in. I was a special race event. I had a few problems, tires rubbing, we had to shift the rear end over. Minor issues to be expected the first time out.
I was really happy with how the car ran. After coming out so soft on the foot break ,when the turbos came on and started to load ,it was UNREAL!!!!
The first run caught me off guard, I couldn't believe how hard it pulled.
I really have to thank Tom Izzo @ Ls1speed, Jim and Dan. Killer set up guys!!!!
THANKS!!!! 
Vid added on post #33
I used the foot brake to bring the rpm up to 1500 to 1800 , I didn't want to roll through the lights. 60' 1.524 8th 5.916 @ 124.70 I let out of it so I could check a/f, breaking before the finish line. 9.413 @ 120.93.
I only got on more run in. I was a special race event. I had a few problems, tires rubbing, we had to shift the rear end over. Minor issues to be expected the first time out.
I was really happy with how the car ran. After coming out so soft on the foot break ,when the turbos came on and started to load ,it was UNREAL!!!!
The first run caught me off guard, I couldn't believe how hard it pulled. I really have to thank Tom Izzo @ Ls1speed, Jim and Dan. Killer set up guys!!!!
THANKS!!!! Vid added on post #33
Last edited by LASTLS1; Aug 22, 2006 at 10:36 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
6 Second Club Moderator
iTrader: (7)
Joined: Sep 2002
Posts: 3,682
Likes: 0
From: Lombard .IL
Originally Posted by Navy David SS
Nice run. Do you plan on running 28" with 3.73 in a 1/4 with that much power? Or are you planning some more changes? Learning curve is very steap with turbos.
David
David
I'm going to run the 28" tires. I have a new Currie 9" at my work, BUT "Currie" ships the rear end in a CARD BOARD BOX!!!!*(^#&^#(&^#(^#. So the bracket going to the torque arm and hardware parts were missing.
I knew the 3.73's were not going to work. I wanted to check the a/f ratio on the first run, other wise I'm sure it would have run a 9.0-9.1 right off the trailer. I'm sure launching off the t-brake will be a little tricky, I don't have a wheelie bar.
Good luck on yours, keep up the good work!
Thread Starter
6 Second Club Moderator
iTrader: (7)
Joined: Sep 2002
Posts: 3,682
Likes: 0
From: Lombard .IL
Originally Posted by Slow Z28
was badass. my yellow mustang buddy was very impressed 
Yea, I like his car. I didn't know how fast it was, I thought it would have been closer. He's going to run my friends white Mustang next time. It was a fun night.
Originally Posted by LASTLS1
I'm going to run the 28" tires. I have a new Currie 9" at my work, BUT "Currie" ships the rear end in a CARD BOARD BOX!!!!*(^#&^#(&^#(^#. So the bracket going to the torque arm and hardware parts were missing.
I knew the 3.73's were not going to work. I wanted to check the a/f ratio on the first run, other wise I'm sure it would have run a 9.0-9.1 right off the trailer. I'm sure launching off the t-brake will be a little tricky, I don't have a wheelie bar.
Good luck on yours, keep up the good work!
I knew the 3.73's were not going to work. I wanted to check the a/f ratio on the first run, other wise I'm sure it would have run a 9.0-9.1 right off the trailer. I'm sure launching off the t-brake will be a little tricky, I don't have a wheelie bar.
Good luck on yours, keep up the good work!
What gears did you decide on?
If you don't have wheelie bars at least add some limiters. Mine's been on the wheelie bars on a couple of times. The limiters are doing their job.
Good luck.
David
